Abstract:Accurate density data and a predictive equation of state (EoS) for the CO2-CH4 system are significantly important for the application of natural gas purification and carbon capture, utilization, and storage (CCUS). In this work, densities of the CO2-CH4 binary system with CO, mole fractions ranging from 0.0998 to 0.8988 were measured at temperatures of 313-353 K and pressures of 3-18 MPa using a magnetic suspension balance, and the compressibility factors and the relative combined standard uncertainties were also calculated correspondingly. The PC-SAFT EoS was employed for the density modeling, and the PR EoS was used for comparison. The measured density data in this work and experimental density data from the literature were used to optimize the binary interaction parameter kg in the PC-SAFT EoS and PR EoS. The predicting abilities of PC-SAFT and PR EoS with the optimized kg were compared to the case without binary interaction (k(ij) = 0). The PC-SAFT EoS with the optimized ku had better performance than the PR EoS with optimized k(ij), and it could predict the density properties of the CO2-CH4 system accurately, with an average absolute deviation (AAD) of 1.16%. Modelings from PC-SAFT with and without the optimized were then compared with the measured densities obtained in this work. The relative deviations for the calculation from PC-SAFT with the optimized kg were within the range from -3.93 to 2.94%. Moreover, the CO2-CH4 binary systems with CO2 mole fractions of 0.7985 and 0.8988 in this work can be regarded as CO2-rich fluids, and their density reductions compared with pure CO2 were evaluated for the measured density data and the values calculated from the modified PC-SAFT.

Accurate Density Measurements on a Binary Mixture (carbon Dioxide + Methane) at the Vicinity of the Critical Point in the Supercritical State by a Single-Sinker Densimeter

Accurate Density Measurements on Ternary Mixtures (carbon Dioxide + Nitrogen + Argon) at Temperatures from (323.15 to 423.15) K with Pressures from (3 to 31) MPa Using a Single-Sinker Densimeter

Measurement And Modeling Of The High-Pressure Phase Behavior Of The Carbon Dioxide Plus Propene Oxide Binary System

Density Measurements on Binary Mixtures (nitrogen + Carbon Dioxide and Argon + Carbon Dioxide) at Temperatures from (298.15 to 423.15) K with Pressures from (11 to 31) MPa Using a Single-Sinker Densimeter

Density Characteristics of CO2–CH4 Binary Mixtures at Temperatures from (300 to 308.15) K and Pressures from (2 to 18) MPa

Density Characteristics of a Multicomponent CO2/N2/CH4 Ternary Mixture at Temperature of 293.15–353.15 K and Pressure of 0.5–18 MPa

Measuring and Modeling the Density of Some Typical Binary Mixtures in the Conditions of 280-423.15 K and 0.1-9 MPa

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures Up to 25 MPa

Measurement of Critical Parameters for the Binary Mixture of R744 (carbon Dioxide)+R1243zf (3,3,3-Trifluoropropene)

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Densities and Volumetric Characteristics of Binary System of CO2 + Decane from (303.15 to 353.15) K and Pressures Up to 19 MPa

Measurement of bubble points, dew points and critical points of carbon dioxide/vinyl chloride binary system

Density Measurements of the H-2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Thermodynamic Properties of Supercritical Mixtures of Carbon Dioxide and Methane: A Molecular Simulation Study

Densities of CO2/N2/O2 ternary mixtures at temperatures from (300.15 to 353.15) K and pressures from (5 to 18) MPa

Vapor-liquid Equilibrium Measurement for Carbon Dioxide (co2)+propylene (R1270) Binary Mixture at Temperatures from Subcritical to Supercritical

Density Characteristics of the CO2–CH4 Binary System: Experimental Data at 313–353 K and 3–18 MPa and Modeling from the PC-SAFT EoS

Vapor–Liquid Equilibrium for the Mixture Nitrogen (N2) + Methane (CH4) in the Temperature Range of (110 to 125) K

PρT Measurements and Modelling of (N-Decane + M-Xylene) Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Vapor-liquid Equilibrium Measurement and Critical Line Prediction for Carbon Dioxide (CO2) + Fluoroethane (R161) Binary Mixtures

Density and Volumetric Properties of Binary Mixtures of CO2 + Hexadecane from (303.2 to 473.2) K and Pressures Up to 50.0 MPa