Abstract:Recently, with rapid development of perovskite solar cells, the record efficiency has exceeded 24.2%. However, the research of efficiency improvement never stops. This work introduces an effective approach to remarkably reduce the device reflection loss by using light management (LM) cover layer. A specific model combined with ray and wave optics was built to numerically optimize the texture of the LM layers for light harvesting in photovoltaics cells and explore the optical principles in the light trapping. The LM layer texture is made of 2D periodic triangle structures. Both symmetric and asymmetric triangle structures were investigated. The results indicate that asymmetric structures possess the close performance compared with symmetric ones, and notably, on contrary to the symmetric structures, the light trapping abilities are much more insensitive to the bottom thicknesses of asymmetric structures. It will benefit the practical fabrication, since the precise bottom thickness control can be avoided. From the optimization results, 3 optimal structures are found. With the optimal LM layers, a thin active layer (165nm) device is able to produce the short circuit current intensities (Jsc) of around 21mA/cm2, which is approximately equivalent to the Jsc of a thick active layer (800nm) device without LM layers. Meanwhile, about 23% power conversion efficiency (PCE) enhancement is achieved. On the other hand, active layer thickness also makes influence on the light trapping abilities. As the active layer thickness is increased from 165nm to 800nm, the Jsc only improves by about 2.4mA/cm2, while the PCE enhancement is dropped from ~23% to ~11%. In consideration of the compromise between total device energy output and PCE enhancement, as well as material cost reduction, the active layer with around 165nm should be an optimal thickness.

Optimal Design and Fabrication of Multilayer Antireflection Coating for III-V Quadruple-Junction Solar Cells

Optimal Design of Quadruple-Layer Antireflection Coating Structure for Conversion Efficiency Enhancement in Crystalline Silicon Solar Cells

Double-layer anti-reflection coating containing a nanoporous anodic aluminum oxide layer for GaAs solar cells

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

High-Low Refractive Index Stacks for Broadband Antireflection Coatings for Multijunction Solar Cells

Multilayer anti-reflective coating with ultra-low refractive index SiO 2 nanopillars for high efficiency multi-junction GaAs solar cells

The Design and Optimization of an Anti-Reflection Coating and an Intermediate Reflective Layer to Enhance Tandem Solar Cell Photons Capture

Optimization of multilayer anti-reflection coatings for efficient light management of PEDOT:PSS/c-Si heterojunction solar cells

High-efficiency InP-based Multijunction Solar Cells

Fabrication of Double Antireflection Layer of SiO 2 /SiN x via Spin Coating and Brush Painting for Enhanced Performance of Silicon Solar Cells

Double layer antireflection coating for high-efficiency passivated emitter silicon solar cells

Method for designing a broadband and omnidirectional hybrid antireflection coating for organic solar cells using the quarter-wavelength rule

Real-Time Optimization of Anti-Reflective Coatings for CIGS Solar Cells

Optimization of Light Management Layers for Light Harvest of Perovskite Solar Cells.

Combined SiO2 Antireflective Coatings with MOCVD-ZnO:B to Improve Light Absorption in Thin-Film Solar Cells

Integrated optical nanostructures for wide-angle antireflection and light trapping in III/V solar cells

Improving the Solar Cell Module Performance by a Uniform Porous Antireflection Layer on Low Iron Solar Glass

Low-cost, Universal Light-Harvesting Coating Layer for Thin Film Solar Cells by Employing Micro-Prism Films

Influence of WO3-Based Antireflection Coatings on Current Density in Silicon Heterojunction Solar Cells

Quadruple-Junction Thin-Film Silicon Solar Cells Using Four Different Absorber Materials

A Novel Design For High-Temperature Solar Selective Coating