Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Optimization-based Algorithm for Solving the Discrete X-Ray Transform with Nonlinear Partial Volume Effect

A Preliminary Study on Explicit Compensation for the Non-Linear-partial-volume Effect in CT

Non-convex primal-dual algorithm for image reconstruction in spectral CT

Optimization-based Reconstruction for Correcting Non-Linear Partial Volume Artifacts in CT

An Investigation of Direct Image Reconstruction in DECT with Physical Data

An extended primal-dual algorithm framework for nonconvex problems: Application to image reconstruction in spectral CT

Convex optimization problem prototyping for image reconstruction in computed tomography with the Chambolle-Pock algorithm

Image reconstruction and scan configurations enabled by optimization-based algorithms in multispectral CT

Prototyping optimization-based image reconstructions from limited-angular-range data in dual-energy CT

TH-CD-303-02: A GPU-Based Iterative Image Reconstruction Solver with 4D Regularization for Low-Dose Helical 4DCT

Prototyping Optimization Problems for Digital Breast Tomosynthesis Image Reconstruction with a Primal-Dual Algorithm

Optimization-based Region-of-interest Reconstruction for X-ray Computed Tomography Based on Total Variation and Data Derivative

Iterative Inversion of Deformation Vector Fields with Feedback Control

An algorithm for constrained one-step inversion of spectral CT data

Image reconstruction in phase-contrast CT with shortened scans

Optimization-based image reconstruction with artifact reduction in C-arm CBCT.

Preliminary Study of Image Reconstruction from Sparse-View Data in Phase-Contrast CT

Optimization-Based Image Reconstruction from Low-Dose Patient Breast Ct Data

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

An Extended Primal-Dual Algorithm Framework for Nonconvex Problems with Application to Nonlinear Imaging

A New In-Line X-ray Phase-Contrast Computed Tomography Reconstruction Algorithm Based on Adaptive-Weighted Anisotropic TpV Regularization for Insufficient Data.