Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Prototyping optimization-based image reconstructions from limited-angular-range data in dual-energy CT

Dual-energy CT imaging with limited-angular-range data

Overlapping Scanning Arcs of Limited-Angular Range for Dual-Energy CT

Dual-energy CT imaging over non-overlapping, orthogonal arcs of limited-angular ranges

Preliminary Study of Image Reconstruction for Breast DECT with Limited-Angular-Range Data

Preliminary study on image reconstruction for limited-angular-range dual-energy CT using two-orthogonal, overlapping arcs

CT imaging with truncated data over limited-angular ranges

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

Image reconstruction in phase-contrast CT with shortened scans

Image reconstruction from partially truncated data over limited-angular ranges

Optimization-Based Image Reconstruction Regularized with Inter-Spectral Structural Similarity for Limited-Angle Dual-Energy Cone-Beam CT

Directional-TV algorithm for image reconstruction from limited-angular-range data

Dual-energy CT Reconstruction from Dual Quarter Scans

Simultaneous correction of limited-angular-range and beam-hardening artifacts in dual-energy CT

An Investigation of Direct Image Reconstruction in DECT with Physical Data

Image reconstruction and scan configurations enabled by optimization-based algorithms in multispectral CT

Optimization-based image reconstruction with artifact reduction in C-arm CBCT.

Optimization-Based Image Reconstruction from Low-Dose Patient Breast Ct Data

A Preliminary Study Of Image Reconstruction From Low-Dose Data In Dedicated Breast Ct

Distribution of ICAM-1 Immunoreactivity During Aging in the Human Orbitofrontal Cortex

4D-image reconstruction directly from limited-angular-range data in continuous-wave electron paramagnetic resonance imaging