Abstract:Abstract In recent years, there has been a growing concern for fluid spill from hydraulic cylinders in the offshore oil and gas industry. To diagnose the leakage from hydraulic cylinders, there have been attempts made in literature using fluid and pressure-based condition monitoring techniques. However, there have been limited attempts to monitor leakage from hydraulic cylinders using acoustic emissions. Therefore, in this paper, an attempt has been made to understand the fluid leakage in the hydraulic cylinder based on acoustic emissions. An experimental study was performed using a test rig (with a water-glycol as hydraulic fluid) which closely replicates the operation of a hydraulic cylinder. As piston rod seal failure is the foremost cause for leakage, experiments were performed using unworn, semi-worn, and worn piston rod seals. For each seal condition, experiments were performed for five strokes at pressure conditions of 10, 20, 30, and 40 bar. In this study, the continuous acoustic emission signal was observed for each hydraulic cylinder stroke. Acoustic emission data was analysed using different techniques such as time domain, frequency domain, and time-frequency technique. By using acoustic emission features such as root mean square (RMS), peak, skewness, median frequency, and mean frequency, it was possible to identify and separate non-leakage and leakage conditions in the test rig. By using AE bandpower and power spectral density features, it is also possible to identify the leakage due to semi-worn seal and worn seal in the test rig. This study lays a strong basis to develop a real-time monitoring technique based on acoustic emissions to monitor the health of piston rod seals used in the hydraulic cylinder in the offshore industry.

Gas Face Seal Status Estimation Based on Acoustic Emission Monitoring and Support Vector Machine Regression

Research on Diagnosis Method of Heavy-Pressure and High-Speed Dynamic Sealing Fault Based on Layer Support Vector Machine

In situ monitoring of FDM machine condition via acoustic emission

Fault Diagnosis of Dry Gas Seal Operation Status Based on Acoustic Emission Monitoring

State Evolution of Dry Gas Seal During Repeated Start–Stop Operation Using Acoustic Emission Method

Analysis of the Dynamic Friction of a Gas Face Seal Based on Acoustic Emissions

An Acoustic Emission Study on the Starting and Stopping Processes of a Dry Gas Seal for Pumps

Real-time FDM Machine Condition Monitoring and Diagnosis Based on Acoustic Emission and Hidden Semi-Markov Model

Magnetic Fluid Sealing Status Estimation Based on Acoustic Emission Monitoring

Discriminative Features of Abnormities in a Spiral Groove Gas Face Seal Based on Dynamic Model Considering Contact

Face Rub-Impact Monitoring of a Dry Gas Seal Using Acoustic Emission

Face grooves for state monitoring in dry gas seals

Adaptive Analysis for Acoustic Emissions Generated from a Gas Face Seal

Evolution of Bi-Gaussian Surface Parameters and Sealing Performance for a Gas Face Seal under a Low-Speed Condition

Condition monitoring of hydraulic cylinder seals using acoustic emissions

Status Recognition of Magnetic Fluid Seal Based on High-Order Cumulant Image and VGG16

Fault diagnosis method and experimental research of reciprocating seal based on CFD-GAN-AE

Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing

Investigation on transient response of gas face seals based on a double mass kinematic model considering Coulomb friction

Flow-State Identification of Oil-Based Magnetic Fluid Seal Based on Acoustic Emission Technology

Method for Solving the Nonlinear Inverse Problem in Gas Face Seal Diagnosis Based on Surrogate Models