Abstract:It is necessary to fabricate (RE)BCO bulk high temperature superconductors in the form of individual single grains in order to maximise the length scale over which current flows, and hence trapped magnetic field. However, inherent difficulties in the grain growth process place limitations on the diameter and height of the single grain that may be achieved by existing melt processes. A practical approach to increase the height of the sample and the trapped field at its surface is by assembling individual single grains in a stack formation with their ab planes aligned parallel, primarily to avoid the expensive process of fabricating large, individual monoliths. The trapped fields observed at the top and bottom surfaces of a single grain sample are frequently different since both the superconducting and physical properties of single grain (RE)BCO samples are generally non-uniform. This leads to challenges in determining how to arrange spatially stacks of single grain samples to generate the largest and most uniform trapped field overall. In this study we report the optimisation of two-stack configurations involving a total of 8 individual GdBCO/Ag single grains. The samples were arranged in four pairs and configured with different surfaces in contact in the assembly of the stack. The primary superconducting properties for trapped field and total flux applications were measured at 77 K and compared for each stack arrangement. The initial results indicate that surfaces with inferior flux trapping properties (measured in terms of the overall trapped field value) of a two-sample stack should be positioned at the middle of the assembly toachieve the best overall trapped field and higher total flux at the external, and therefore, usablesurface of the stack sample. A numerical modelling method that incorporates different Jc-Bcharacteristics for the top and bottom layers of a single grain to take account of the variability inphysical properties and spatial non-uniformity confirmed the optimised experimental arrangement of the stacked bulk samples. Furthermore, the optimisation of single grains of ring geometry to achieve a longer and wider uniform magnetic field zone inside the bore was also performed.

Assessment of Critical Factors Affecting the Performance of Trapped Field Magnets Using Thin Film Superconductor Tapes

Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets

Demonstration of an iron-pnictide bulk superconducting magnet capable of trapping over 1 T

Comparative calculations of trapped field and trapped magnetic flux with different multi-pulse magnetization methods for a bulk high-temperature superconductor

Review on high-temperature superconducting REBCO trapped field magnets

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Comparison of the Field Trapping Ability of MgB2 and Hybrid Disc-Shaped Layouts

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Optimisation of stacked, bulk high temperature superconductors for trapped-field magnet applications

A trapped field of 17.7 T in a stack of high temperature superconducting tape

Simulation of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization Using Controlled Magnetic Density Distribution Coils

A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel

Superconducting Bulk Magnets: Very High Trapped Fields and Cracking

Reliable 4.8 T trapped magnetic fields in Gd–Ba–Cu–O bulk superconductors using pulsed field magnetization

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Investigation of the Slotting Effect on the Magnetisation of Trapped Field Stacks in a Superconducting Machine

Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique

Superconducting YBCO Foams as Trapped Field Magnets

Low field anomaly in the critical current of Ba1‐xKxFe2As2 tapes

High-performance Ba1-xKxFe2As2 superconducting tapes with grain texture engineered via a scalable and cost-effective fabrication

Measurement and Analysis of Thermal Materials in the Thermally Actuated Magnetization Flux Pumping Method