STRENGTH AND MASS CHANGE OF SLAG/FLY ASH GEOPOLYMER MORTAR UNDER DIFFERENT CURING CONDITIONS

Xueying Li,Zhenzhen Jiao,Shoujie Zhang,Qinglin Yu
2014-01-01
Abstract:This study aims to investigate the strength of slag/fly ash geopolymer mortar with different slag contents in various curing conditions, and the loss of strength and mass in different relative humidity. Three curing conditions viz., standard curing at 20 +/- 3 degrees C and RH 95% (abbreviated as C); steam curing at 60 degrees C for 24 h (abbreviated as S); water curing at 20 +/- 3 degrees C (abbreviated as W). The results showed that the compressive and flexural strengths increased as the slag content increasing both in standard and steam curing conditions. The strength of geopolymer cured for 24 h in steam condition is similar to that cured for 28 d in standard condition. Steam curing at early age is benefit for the long term strength development of geopolymer. However, the strength of geopolymer with standard curing at early age decreased slightly when it is cured for another 28 d in water. Under standard curing condition, the mass of slag/fly ash geopolymer mortar decreased until 3 d, then increased from 3d to 28d. Under water immersion condition, all the mortars showed the mass increased and the mass increment of samples with water curing 28d after steam curing was the highest.
What problem does this paper attempt to address?