Bending Performance of Unbonded Prestressed Basalt Fiber Recycled Concrete Beams

Shiping Li,Yibei Zhang,Wujun Chen

DOI: https://doi.org/10.1016/j.engstruct.2020.110937

IF: 5.582

2020-01-01

Engineering Structures

Abstract:This study investigated the influences of volumetric basalt fiber dosage and recycled coarse aggregate replacement rate on the flexural performance of unbonded prestressed basalt fiber recycled concrete beams. A symmetric loading test was conducted on nine specimens based on their variety of volumetric basalt fiber dosages and aggregate replacement rates. Failure modes, bearing capacities, deformation characteristics, and crack widths were observed, and the influences of volumetric basalt fiber dosage and recycled coarse aggregate replacement rate on flexural performance are discussed. The bending process of unbonded prestressed recycled concrete beams and unbonded prestressed basalt fiber recycled concrete beams exhibits an elastic stage, a cracking stage, and a failure stage, which is similar to that of conventional unbonded prestressed concrete beams. The addition of basalt fiber can effectively enhance the adhesion between mortar and recycled coarse aggregate, inhibiting crack development, increasing the cracking load, and enhancing ductility. After verifying the applicability of plane-section assumptions via testing, and referring to methods for calculating the bearing capacity of unbonded prestressed conventional concrete beams, formulas for calculating the flexural capacity and maximum crack width of unbonded prestressed recycled concrete beams and unbonded prestressed basalt fiber recycled concrete beams were established. These provide a simple and feasible method for the calculation of flexural capacity and crack width.