Abstract:Estimating the possible region of liquefaction occurrence during a strong earthquake is highly valuable for economy loss estimation, reconnaissance efforts and site investigations after the event. This study identified and compiled a large amount of liquefaction case histories from the 2008 Wenchuan earthquake, China, to investigate the relationship between the attenuation of seismic wave energy and liquefaction distance limit during this earthquake. Firstly, we introduced the concept of energy absorption ratio, which is defined as the absorbed energy of soil divided by the imparted energy of seismic waves at a given site, and the relationship between the energy absorption ratio and the material damping ratio was established based on shear stress–strain loop of soil element and the seismic wave propagation process from the source to the site. Secondly, the threshold imparted seismic energy of liquefaction was obtained based on existing researches of absorbed energy required to trigger liquefaction of sandy soils and the ground motion attenuation characteristics of the 2008 Wenchuan earthquake, and the liquefaction distance limit of this earthquake was estimated according to the proposed magnitude–energy–distance relationship. Finally, the field liquefaction database of 209 sites of the 2008 Wenchuan earthquake was used to validate such an estimation, and the field observed threshold imparted seismic energy to cause liquefaction in recent major earthquakes worldwide was back-analyzed to check the predictability of the present method, and several possible mechanisms were discussed to explain the discrepancy between the field observations and the theoretical predictions. This study indicates that seismic energy attenuation and liquefaction distance limit are regional specific and earthquake dependent, and 382 J/m 3 is the average level of threshold imparted seismic energy to cause liquefaction for loose saturated sandy soils, and the corresponding liquefaction distance limit is approximately 87.4 km in fault distance for a M w = 7.9 event in the Chengdu Plain. The proposed regional energy attenuation model and threshold imparted seismic energy may be considered as an approximate tool in evaluating the liquefaction hazard during potential earthquakes in this area.

Comment on “annual Probability and Return Period of Soil Liquefaction in Yuanlin, Taiwan Attributed to Chelungpu Fault and Changhua Fault” by Lee Et Al., in Engineering Geology, 114: 343–353 (2010)

Stochastic Finite-Fault Modelling of Ms 6.8 Luding Earthquake in 2022 and Seismic Hazard Scenario of Moxi Fault, Southwest China

Limit on Slip Rate and Timing of Recent Seismic Ground-Ruptures on the Jinghong Fault, SE of the Eastern Himalayan Syntaxis

Assessment of Seismic Hazard Associated with the Meishan Fault in Central Taiwan

The earthquake probabilities of the Liupanshan fault zone based on the Coulomb stress and friction constitutive law

Probability Assessment of Land Use Suitability with Ground Surface Ruptures Induced by Strong Earthquakes

Attenuation of Seismic Wave Energy and Liquefaction Limit During the Great Wenchuan Earthquake

Failure Mechanism and Early Warning of an Excavation-Induced Soil Landslide

A New Procedure to Best-Fit Earthquake Magnitude Probability Distributions: Including an Example for Taiwan

Probabilistic-based seismic fragility assessment of earthquake-induced site liquefaction

The role of the geological uncertainty in a geotechnical design – A retrospective view of Freeway No. 3 Landslide in Northern Taiwan

A Liquefaction Case Study of Gently Sloping Gravelly Soil Deposits in the Near-Fault Region of the 2008 Mw7.9 Wenchuan Earthquake

Evaluation of SPT-Based Liquefaction Assessment Methods in China

Parameter estimation for predicting near-fault strong ground motion and its application to Lushan earthquake in China

Threshold seismic energy and liquefaction distance limit during the 2008 Wenchuan earthquake

3D modeling of the ground deformation along the fault rupture and its impact on engineering structures: Insights from the 1999 Chi-Chi earthquake, Shigang District, Taiwan

Applicability of Two Newmark Models in the Assessment of Coseismic Landslide Hazard and Estimation of Slope-Failure Probability: An Example of the 2008 Wenchuan Mw 7.9 Earthquake Affected Area

Improving Soil Liquefaction Prediction Through an Extensive Database and Innovative Ground Motion Characterization: A Case Study of Port Island Liquefied Site

Failure of engineering structures and associated geotechnical problems during the 2022 ML 6.8 Chihshang earthquake, Taiwan

Landslide hazard assessment of the fault zone considering the fault effect: a case study of the Lixian–Luojiabu fault zone in Gansu Province (China)

Modified stochastic finite-fault modelling based on the rupture process: a case study of the 2013 Mw 6.7 Lushan earthquake in China