Abstract:Premixed flames propagating within small channels show complex combustion phenomena that differ from flame propagation at conventional scales. Available experimental and numerical studies have documented stationary, non-stationary, or asymmetric modes that depend on properties of the incoming reactant flow as well as channel geometry and wall temperatures. This work seeks to illuminate mechanisms leading to symmetry breaking and limit cycle behavior that are fundamental to these combustion modes. Specifically, four cases of lean premixed methane/air combustion—two equivalence ratios (0.53 and 0.7) and two channel widths (2 mm and 5 mm)—are investigated in a 2D configuration with constant channel length and bulk inlet velocity, where numerical simulations are performed using detailed chemistry. External wall heating is simulated by imposing a linear temperature gradient as a boundary condition on both walls. In the 2 mm channel, both equivalence ratios produce flames that stabilize with symmetric flame fronts after propagating upstream. In the 5 mm channel, flame fronts start symmetrically, although symmetry is broken almost immediately after ignition. Further, 5 mm channels produce non-stationary combustion modes with dramatically different limit cycles: in the leaner case ( φ = 0.53), the asymmetric flame front flops periodically, whereas in the richer case ( φ = 0.7), flames with repetitive extinctions and ignitions (FREI) are observed. To further understand the flame dynamics, reaction fronts and flame fronts are captured and differentiated. Results show that the loss of flame front symmetry originates in a region close to the flame cusp, where flow and chemical characteristics exhibit large gradients and curvatures. Limit cycle behavior is illuminated by investigating flame edges that are formed along the wall, and accompany local or global ignition and extinction processes. In the flopping mode ( φ = 0.53), local ignition and extinction in regions adjacent to the wall result in oblique fronts that advance and recede along the wall and redirect the flow ahead of the flame. In the FREI mode, asymmetric flames propagate much farther upstream, where they experience global extinction due to heat losses, and re-ignite far downstream with opposite flame front orientation. In both cases, an interaction of flow and chemical effects drives the asymmetric limit cycles. The lack of instabilities and asymmetries for the 2mm cases is attributed to insufficient wall separation, which is of the same order of magnitude as the flame thickness.

Numerical Investigations on the Methane-Oxygen Diffusion Flame-Street Phenomena in a Microchannel: Effects of Wall Temperatures, Inflow Rates and Global Equivalence Ratios on Flame Behaviors and Combustion Performances

Local Flame And Flow Properties Of Propagating Premixed Turbulent Flames During Light-Round Process In A Micca-Type Annular Combustor

A Direct Numerical Simulation Study of Flame Structure and Stabilization of an Experimental High Ka CH4/air Premixed Jet Flame

A numerical study of counterflow diffusion flames of methane/air at various pressures

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

A Comparison Between Direct Numerical Simulation and Experiment of the Turbulent Burning Velocity-Related Statistics in a Turbulent Methane-Air Premixed Jet Flame at High Karlovitz Number

Parametric Study on Reaction Characteristics of Methane/air Mixture in Microchannels

A NUMERICAL STUDY ON THE TRANSITION CHARACTERISTICS OF AN INVERSE MICRO-SCALE DIFFUSION FLAME TO MICRO-SCALE PREMIXED FLAME UNDER HEAT RECIRCULATION CONDITIONS

Numerical and Experimental Investigations on Combustion Characteristics of Premixed Lean Methane–Air in a Staggered Arrangement Burner with Discrete Cylinders

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames

Experimental Investigation of Lean Methane–Air Laminar Premixed Flames at Engine-Relevant Temperatures

Numerical investigation of unsteady flame propagation assisted by low-temperature chemistry

Numerical analysis of flame instabilities in narrow channels: Laminar premixed methane/air combustion

Effects of flow rate and equivalence ratio on syngas flames in a multi-nozzle micromix model combustor

Turbulent Accelerating Combusting Flows with Methane-Vitiated Air Flamelet Model

An Experimental and Theoretical Investigation of the Dilution, Pressure and Flow-Field Effects on the Extinction Condition of Methane-Air-nitrogen Diffusion Flames

Over-rich Combustion of CH4, C2H6, and C3H8 +air Premixed Flames Investigated by the Heat Flux Method and Kinetic Modeling

Dynamics of unsteady premixed flames in meso scale channels and the effects of varying the wall heating conditions

Low-dimensional modelling of flame dynamics in heated microchannels

Turbulent Accelerating Combusting Flows with a Methane-Vitiated Air Flamelet Model

Experimental and chemical kinetics analysis on the combustion behaviors and flame instabilities of diluted methane/air mixtures