Abstract:Latent heat storage is one of the most efficient ways of storing thermal energy. Organic phase change materials are latent heat storage materials and they have been widely used as suitable materials for thermal energy storage applications due to their high latent heat and small temperature difference between storing and releasing heat. In this thesis, micro- and nano- scaled phase change materials were fabricated for thermal energy storage. A novel microencapsulated phase change material slurry (MPCS) was introduced by dispersing microencapsulated phase change materials (MEPCMs) into water with an amount of surfactants and its thermal and rheological properties were also investigated. The results showed that MPCS fabricated in the current research are suitable for potential application as heat transfer media in the thermal energy storage. A new methodology was proposed to investigate the heat transfer characteristics of MPCSs. Experiments were carried out in laminar, transition and turbulent flow for MPCSs in a circular tube under constant heat flux, respectively. The experimental results demonstrated that in comparison to water as a heat transfer fluid at the same flow rate, the heat transfer of 10 wt. % MPCS could be enhanced by 10 % in transition flow condition while the PCM particles were in solid/liquid state, and the heat transfer of 5 wt. % MPCS could be enhanced by 21.9 % and 19.2 % in turbulent flow condition while the PCMs are in solid and solid/liquid states, respectively. Nevertheless, the heat transfer enhancement depends on the combination factors, including concentration of the slurry and flow rate of the slurry. A novel heat transfer fluid containing microencapsulated phase change material and multi-walled carbon nanotubes was prepared. The results showed that addition of MWCNTs to microencapsulated phase change material slurry can effectively improve the thermal conductivity of suspensions and it is also found that a blend of 10 wt. % MEPCM and 1 wt. % MWCNTs suspension can achieve the best thermal performance and stability among other blends in the experiment. A novel nanocapsule containing n-octadecane with an average 50 nm thick shell of poly (ethyl methacrylate) (PEMA), and with a core/shell weight ratio of 80/20 was synthesized by direct miniemulsion method. The results showed that PEMA/octadecane nanocapsule had good thermo-physical properties and had much higher encapsulation ratio (89.5%) and encapsulation efficiency (88.9%). For the first time, a novel PCM nanoparticle suspension (nano-PCS) was synthesized by direct miniemulsion method for thermal energy system application. It was found that the nano-PCSs had good thermo-physical properties and durability. All nano-PCSs presented narrow size distribution and stable particles. In comparison to the convectional PCM emulsion and MPCS, the nano-PCS tends to be more stable and is much easier and cheaper to fabricate in terms of the method and materials used, however, the heat transfer characteristics of the nano-PCS require further experimental investigation

A Review of Thermo-Fluidic Performance and Application of Shellless Phase Change Slurry: Part 2 – Flow and Heat Transfer Characteristics

A Review of Thermo-Fluidic Performance and Application of Shellless Phase Change Slurry: Part 1 – Preparations, Properties and Applications

Preparation, Property and Application of Phase Change Material Emulsions

An Overview of Phase Change Material Slurries: MPCS and CHS

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Phase Change Slurries for Cooling and Storage: An Overview of Research Trends and Gaps

Conjugated Heat and Mass Transfer During Flow Melting of A Phase Change Material Slurry in Pipes

Flow and Heat Transfer Characteristics of Micro-encapsulated Phase Change Material Slurry and Energy Transport Evaluation

Characterization of thermal and hydrodynamic properties for microencapsulated phase change slurry (MPCS)

An Overview of Fundamental Studies and Applications of Phase Change Material Slurries to Secondary Loop Refrigeration and Air Conditioning Systems

Review on phase change material emulsions and microencapsulated phase change material slurries: Materials, heat transfer studies and applications

Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review

Numerical Flow Characteristics of Microencapsulated Phase Change Slurry Flowing in a Helically Coiled Tube for Thermal Energy Storage

Numerical Evaluation on the Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Slurry Flowing in a Circular Tube

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator

Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Thermo-fluidic performance of microencapsulated phase change material slurry in thermal energy storage

Fabrication, Characterization and Thermo-Physical Properties of Micro- and Nano- Scaled Phase Change Materials for Thermal Energy Storage

A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage

A comprehensive review on phase change material emulsions: Fabrication, characteristics, and heat transfer performance