Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Opportunities and Limitations for Existing CHP Plants to Integrate Polygeneration of Drop-in Biofuels with Onsite Hydrogen Production

Retrofitting Biomass Combined Heat and Power Plant for Biofuel Production—A Detailed Techno-Economic Analysis

Complementing Existing Chp Plants Using Biomass for Production of Hydrogen and Burning the Residual Gas in A Chp Boiler

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Efficient Hydrogen Production via Electro-Thermochemical Process and Solid Oxide Fuel Cell: Thermodynamics, Economics, Optimization, and Uncertainty Analyses

Synergistic Combination of Pyrolysis, Anaerobic Digestion, and CHP Plants.

A Polygeneration Process for Heat, Power and DME Production by Integrating Gasification with CHP Plant : Modelling and Simulation Study

Analysis of the Efficiency of Hydrogen Production Technology at Mini-CHP Plants Using Local Fuelsby Thermochemical Method

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol

Improved performance of a residential combined heat and power system by integrating compact fuel processor and proton exchange membrane fuel cell

Gas Turbines Chp For Bioethanol And Biodiesel Production Without Waste Streams

Performance Evaluation of Adding Ethanol Production into an Existing Combined Heat and Power Plant.

Thermodynamic analysis of a novel integrated biomass pyrolysis-solid oxide fuel cells-combined heat and power system for co-generation of biochar and power

Hydrogen production from biomass through integration of anaerobic digestion and biogas dry reforming

Future Applications of Hydrogen Production and CO2 Utilization for Energy Storage: Hybrid Power to Gas-Oxycombustion Power Plants

Evaluation of the Optimum Hybrid Power to Heat Configuration for a Gas Turbine Based Industrial Combined Heat and Power Plant

Investigation of green hydrogen production and development of waste heat recovery system in biogas power plant for sustainable energy applications

Impact of heat recovery and thermal load control on combined heat and power (CHP) performance

Prospects of Fuel Cell Combined Heat and Power Systems

Biomass co-fired combined cycle with hydrogen production via proton exchange membrane electrolysis and waste heat recovery: Thermodynamic assessment

Exergoeconomic Analysis and Multi-Objective Optimization of an Integrated CHP System Based on Syngas-Fueled Planar Solid Oxide Fuel Cell