A numerical study on evaluating sleeping thermal comfort using a Chinese-Kang based space heating system
Guanyu Fang,Shiming Deng,Xuefeng Liu
DOI: https://doi.org/10.1016/j.enbuild.2021.111174
IF: 7.201
2021-10-01
Energy and Buildings
Abstract:<p>Sleeping is an important human activity and heating system is needed for a comfort sleeping thermal environment in winter. By combining the merits from both an air source heat pump (ASHP) and a Chinese-Kang heating system, a prototype bed-based ASHP (B-ASHP) system has been proposed, and several design/operating parameters were experimentally and numerically studied previously. A numerical study using a digital thermal manikin (DTM) on the impacts of four influencing factors, i.e., operating mode, bed surface temperature (<em>t<sub>bed</sub></em>), thermal resistance of mattress (<em>R<sub>mat</sub></em>), and thermal resistance of quilt (<em>R<sub>q</sub></em>) on sleeping thermal comfort was carried out, and the study results are reported in this paper. The numerical study results suggested that firstly, to maintain a suitable sleeping thermal environment, the use of only the Horizontal section (H-Section) of the bed-based heating terminal of the B-ASHP system was adequate; however using the Horizontal and Vertical section (H+V-Section) could minimize the temperature difference between the micro-climate close to the bed and outside environment, although with a higher energy consumption. Secondly, <em>t<sub>bed</sub></em> of the bed-based terminal should be carefully selected, and a <em>t<sub>bed</sub></em> of 44 <sup>o</sup>C could both meet the requirement of thermal comfort and acceptable operating efficiency of the B-ASHP system. Thirdly, the use of a mattress would reduce the heat transfer from the bed-based terminal to a sleeping person and indoor space, however an excessively higher <em>R<sub>mat</sub></em> of mattress would reduce the heating capacity and operating efficiency, leading to a cold sleeping environment. Finally, the use of a quilt would help prevent the heat loss from a sleeping person, thereby maintaining a warmer sleeping thermal environment, however a higher-than-necessary <em>R<sub>q</sub></em> of quilt would decrease the sleeping thermal comfort.</p>
energy & fuels,construction & building technology,engineering, civil