Abstract:A new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN based on the idea of substituting C with N, proper Mo addition, and proper Si and V subtraction was designed, exhibiting higher microstructure and hardness stability than the frequently-used H13 steel. The results showed that the softening mechanism consisted of the coarsening and decomposition of laths, the formation and coarsening of precipitates, the annihilation and rearrangement of dislocations and the formation of sub-grains. The superior thermal stability of 3Cr5Mo2SiVN steel could be attributed to the low precipitate and dislocation recovery. First, the higher activation energy inhibited the diffusion of alloying elements, thus delaying the formation and coarsening of precipitates. Second, the undissolved M(C, N) exhibited a higher solid solution temperature than the undissolved MC, and M 3 C had a stronger heat absorption ability. In addition, the nano‐carbonitride M(C, N) exhibited lower lattice disregistry and interface energy than the nano-carbide MC. Hence, the undissolved M(C, N), M 3 C and nano‐carbonitride M(C, N) showed a higher precipitate stability. Third, in terms of dislocation evolution, the higher stability of lattice constant and solid solution of interstitial atoms as well as the smaller carbide size and lower precipitation content significantly inhibited the dislocation recovery. The preservation of prior austenite grain boundaries and lath boundaries effectively hindered the dislocation migration. After isothermal tempering at 580, 600 and 620 °C for 96 h, the hardness decreased to 41.1, 35.4 and 31.7 HRC with softening rate 4.6, 8.5 and 10.0 for 3Cr5Mo2SiVN steel, and 35.2, 29.3 and 28.1 HRC with softening rate 7.2, 11.2 and 11.5 for H13 steel. The difference in hardness and softening rate at 600 °C was the most prominent, attaining respective values of 6.1 HRC and 2.7, respectively.

High-Temperature Wear Mechanism of Cast Hot-Forging Die Steel 4Cr3mo2niv

High-temperature oxidation wear performance and mechanism of Cr–Mo (W)–V hot-work die steel

The effect of temperature on the unlubricated sliding wear of 5 CrNiMo steel against 40 MnB steel in the range 400–600°C

High Temperature Sliding Wear Behaviors of Ion Plating Tin Composite Coating with Ion Nitriding As Interlayer on Hot Work Die Steel

Wear characteristics of austenitic steel and martensitic steel at high temperature

Research on oxidation wear mechanism of the cast steels

Study of High Temperature Wear Resistance of Hot Work Steel for Magnesium Alloy Die Casting

Experimental and Numerical Study on Friction and Wear Performance of Hot Extrusion Die Materials

Effects of Temperature on the Tribological Properties of NM600 under Sliding Wear

Element diffusion behaviors at high temperature and their effects on microstructure and tribological properties of Cr2O3 films

A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles

High Temperature Tribology Behaviors of Brush Plated Ni–W–Co/SiC Composite Coating

Effects of Microstructure Evolution on Fretting Wear Behaviors of 25CrNi2MoVE Steel under Different Tempering States

High temperature tribological behavior of atmospheric plasma-sprayed CoCrFeNiW0.3 + 5 at% C high-entropy alloy coating

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Wear Resistance of Hot Work Steel at Elevated Temperature for Magnesium Die Casting

Effect of the Laser Cladding Parameters on Microstructure and Elevated Temperature Wear of FeCrNiTiZr Coatings

Thermal stability and softening mechanism of a new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN

On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature

High Temperature Oxidation and Wear Behaviors of Ti-V-Cr Fireproof Titanium Alloy

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature