Abstract:The toxic Cr(VI) contaminating water released from the metallurgical, dyeing, and electroplating industries is getting worse day by day and is extremely hazardous to human health. Thus, the development of a cost-effective, quick, and efficient adsorbent is highly essential for the Cr(VI) decontamination from wastewater. Herein, a microwave-assisted carbon-based composite called Mg-Fe LDH@OPAC was prepared by assembling Mg-Fe LDH onto orange peel-activated carbon (OAPC). Prior to investigating deeply into the adsorption behavior of the composite, the Mg-Fe LDH@OPAC formation was confirmed by using instrumental techniques like FESEM, EDS, Zeta potential, XRD, FTIR, Raman, XPS, and BET analyzer. The material had a high surface area of 143.9 m 2 /g and showed a good monolayer Langmuir uptake capacity of 118.36 mg/g. Under ideal circumstances, the maximum amount of Cr(VI) was removed within just 120 min and showed high efficiency in the presence of other coexisting anions respectively. The adsorption was accounted by pseudo-second-order kinetics and spontaneous in nature. Ultimately, a possible adsorption mechanism was suggested, confirmed by XPS studies; which showed that oxidation-reduction, electrostatic interaction, and surface complexation reaction were responsible for Cr(VI) adsorption on Mg-Fe LDH@OPAC surface. Environmental contaminants like Cr(VI) in drinking water are highly toxic, and their long-term persistence in the water environment causes mutagenic effects on human beings. We present a novel material for the first time (yet not been reported) by intercalating activated carbon (from a low-cost wedge of orange peel) into Mg-Fe layered double hydroxide (abbreviated as Mg-Fe LDH@OPAC), which has superior hazardous hexavalent chromium metal uptake capability. With the order of SO 4 2- >F - >CO 3 2- >I - >PO 4 3- >NO 3 - the as-prepared Mg-Fe LDH@OPAC exhibits strong selectivity toward Cr(VI) in the presence of varied competing ions with a modest drop in removal effectiveness. The combined properties of AC and LDH make Mg-Fe LDH@OPAC potentially efficient adsorbent to remove Cr(VI) from the different water sources and potentially applied in wastewater treatment.

Adsorption-desorption of chromium(VI) on Mg-Al hydrotalcite-like compounds part I. Adsorption

Comparison and discussion on the adsorption capacity of several compounds with layered structure

Cr(VI) Adsorption by Montmorillonite Nanocomposites

Removal difference of Cr(VI) by modified zeolites coated with MgAl and ZnAl-layered double hydroxides: Efficiency, factors and mechanism

Research on the removal of Cr(VI) ions from wastewater by Mg/Al-layered double oxides

Adsorption of Cr(VI) on calcined MgAl-layered double hydroxides and recycling of spent adsorbents for the removal of organic dyes

Tuning the crosslink structure of cationic hydrogel for enhanced chromium(VI) removal: The covalent and electrostatic co-crosslinked effects and adsorption mechanism

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

Fabrication of highly efficient magnesium silicate and its adsorption behavior towards Cr(VI)

Enhancing the Immobilization of Hexavalent Chromium by the Interlayer Anion Adsorption of the Brucite-Transformed LDH in the Presence of Aluminum Ions

Fabrication of a Novel NiFe2O4/Zn-Al Layered Double Hydroxide Intercalated with EDTA Composite and Its Adsorption Behavior for Cr(VI) from Aqueous Solution

Hexavalent chromium removal from aqueous solution by adsorption on modified zeolites coated with Mg-layered double hydroxides

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U–Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Effective adsorption of Cr(VI) from aqueous solution by Mg-Fe LDH supported on orange peel activated carbon: isotherm, kinetic, thermodynamics and mechanism studies

Selective adsorption and separation of Cr(VI) by surface-imprinted microsphere based on thiosemicarbazide-functionalized sodium alginate

Evenly distribution of amorphous iron sulfides on reconstructed Mg-Al hydrotalcites for improving Cr(VI) removal efficiency

Adsorption of Cr(VI) on 1,2-ethylenediamine-aminated macroporous polystyrene particles

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Microscopic Understanding about Adsorption and Transport of Different Cr (VI) Species at Mineral Interfaces

Mechanisms of Cr(VI) adsorption on schwertmannite under environmental disturbance: Changes in surface complex structures

Preparation of an ionic liquid-based hydrogel with hyperbranched topology for efficient removal of Cr(VI)