Abstract:Flat-field concave diffraction grating is the key device of a portable grating spectrometer with the advantage of integrating dispersion, focusing and flat-field in a single device. It directly determines the quality of a spectrometer. The most important two performances determining the quality of the spectrometer are spectral image quality and diffraction efficiency. The diffraction efficiency of a grating depends mainly on its groove shape. But it has long been a problem to get a uniform predetermined groove shape across the whole concave grating area, because the incident angle of the ion beam is restricted by the curvature of the concave substrate, and this severely limits the diffraction efficiency and restricts the application of concave gratings. the authors present a two-step method for designing convex gratings, which are made holographically with two exposure point sources placed behind a plano-convex transparent glass substrate, to solve this problem. The convex gratings are intended to be used as the Master gratings for making aberration-corrected flat-field concave gratings. To achieve high spectral image quality for the replicated concave gratings, the refraction effect at the planar back surface and the extra optical path lengths through the substrate thickness experienced by the two divergent recording beams are considered during optimization. This two-step method combines the optical-path-length function method and the ZEMAX software to complete the optimization with a high success rate and high efficiency. In the first step, the optical-path-length function method is used without considering the refraction effect to get an approximate optimization result. In the second step, the approximate result of the first step is used as the initial value for ZEMAX to complete the optimization including the refraction effect. An example of design problem was considered. The simulation results of ZEMAX proved that the spectral image quality of a replicated concave grating is comparable with that of a directly recorded concave grating.

Effect of Curve Groove on the Spectral Resolution for Soft X-Ray Holographic Flat-Field Gratings

Design of Multi-Area Grating for Soft X-Ray Flat-Field Spectrograph.

Theoretical Study of Recording Varied Line Spacing Plane Holographic Gratings by Using Auxiliary Gratings

Improving the Spectral Resolution of Soft X-Ray Flat-Field Spectrometer with Multi-Area Gratings

Optimum Design of A Holographic Parallel Flat-Field Grating

Direct Design Method for Holographic Grating Imaging Spectrometer and Corresponding Recording System

Optimum Design of Flat-Field Holographic Concave Grating for Micro-Spectrometers

VUV and Soft X-Ray Diffraction Grating Fabrication by Holographic Ion Beam Etching

Holographic Fabrication of Large-Constant Concave Gratings for Wide-Range Flat-Field Spectrometers with the Addition of a Concave Lens.

Design and fabrication of holographic variable line-spacing gratings for position sensor

Design of soft x-ray varied-line-spacing (VLS) high-dispersion laminar-type grating coated with super-mirror-type (SMT) multilayer for flat-field spectrograph in a region of 2–4 keV

Design Of Variable Line-Space Plane Gratings With Holographic Recording

Study on Coefficients of Groove Density Distribution Equation of Plane Holographic Variable Line Space Gratings

Generalized Groove Density Equation Concerning Bending-Grating-Related Imaging Properties

Freeform Surfaces That Enable High-Quality Offner-type Imaging Spectrometers with Holographic Grating.

Design of High-Density Concave Variable Line Space Grating Based on Lyman Ultraviolet

Development of A High Spectral Resolution Uv Flat-Field Spectrograph

High-efficiency Visible and Near-Infrared Transmission Gratings in Fused Silica for Astronomical Ground-Based Telescope Spectrographs

Aberration-reduced Spherical Concave Grating Holographically Recorded by a Spherical Wave and a Toroidal Wave for Rowland Circle Mounting.

Study on Line-Profiles of Variable Line-Space Plane Gratings with Holographic Recording

Design Method of Convex Master Gratings for Replicating Flat-Field Concave Gratings