Abstract:A two-dimensional ultrasonic-assisted micro-injection molding (2DUμIM) method is proposed, and the feasibility and superiority of 2D ultrasonic vibration in improving the molding quality of the micro polymer part with complex structure are validated. The experiment results show that the increases in the filling areas along the z- and y-directions of the parts molded by the 2DUμIM method are more than double and triple those by the one-dimensional ultrasonic-assisted micro-injection molding (1DUμIM) method, respectively. Simultaneously, the surface roughness of the parts molded by the 2DUμIM method is reduced by 25.2% compared with that by the 1DUμIM method. Moreover, compared with the 1DUμIM results, the cavity temperature increases, the pressure loss decreases, and the pressure difference of the flow field is reduced by 62.2% in the 2DUμIM, showing that the 2D ultrasonic vibration notably weakens the flow resistance and enhances the melt fluidity and flow uniformity, which improves the qualities of mold-filling and surface replication. Furthermore, to clarify the action mechanism of 2D ultrasonic vibration on the flow behavior of the polymer melt, a rheological model of the melt in an unstable flow field caused by 2D ultrasonic vibration is established. The model indicates that the rheological properties of the melt are radically improved by the 2D ultrasonic vibration promoting the mechanical energy, degradation, and viscoelastic heating of the melt. The simulation results of the unstable flow field indicate that, benefiting from the energy transportation, dissipation, and diffusion effects of the unstable flow, the 2D ultrasonic vibration is more significant in increasing the melt shear rate, reducing the melt viscosity, and promoting the melt fluidity and flow uniformities than the 1D ultrasonic vibration, which enhances the filling performance of the melts in multiple dimensions and in corner regions of the micro cavity, and facilitates the melt flow over a longer distance.

Dynamic Numerical Simulation and Experiment Results of Oscillating Packing Injection Molding

Energy-Efficient Enhancement for Viscoelastic Injection Rheomolding Using Hierarchy Orthogonal Optimization

Numerical simulation of filling flow of polymer melt in injection molding

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding

Simulation and Experiment Research on the Proportional Pressure Control of Water-Assisted Injection Molding

Numerical Simulation and Experimental Verification of the Filling Stage in Injection Molding

A Multiscale Simulation of Polymer Melt Injection Molding Filling Flow Using SPH Method with Slip-Link Model

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

The effects of filling patterns on the powder–binder separation in powder injection molding

Experimental and numerical investigations on formation mechanisms of hollow structures in overflow water‐assisted injection‐molded parts of short‐glass‐fiber‐reinforced polypropylene

Investigation of 2D ultrasonic-assisted micro-injection molding

Research on the Application of Injection Molding Simulation Technology in Mold Design

Modeling and Simulation of Injection Molding Process of Polymer Melt by a Robust SPH Method

Modeling and Control of an Electro-hydraulic Injection Molding Machine With Smoothed Fill-to-Pack Transition

Dispersed Phase Deformation Modeling of Immiscible Polymer Blends in Injection Molding

Dimensional Analysis Theory and Molecular Dynamics Simulation of Polypropylene Melt Flow during Injection Molding Process

A Novel Multiscale Methodology for Simulating Droplet Morphology Evolution during Injection Molding of Polymer Blends

Study of dynamic filling process of MIM feedstock into a disk shaped mold cavity

Transition from the Hierarchical Distribution to a Homogeneous Formation in Injection Molded Isotactic Polypropylene (ipp) with Dynamic Mold Temperature Control