Abstract:The effects of wet mixing and traditional mixing on the properties of radial-orientation basalt fiber-reinforced rubber products were studied through experiments. The results show that compared with traditional mixing, the basalt fibers under the wet mixing conditions can more effectively enhance the physical and mechanical properties of composites. The properties of the composites, such as carbon black dispersion, filler dispersion, rolling resistance and wet-sliding resistance, were the best after the latex and carbon black were premixed and then mixed by a mixer. Through extrusion experiments with the developed short-fiber radial-orientation die, it can be found that the fluidity of composites after extrusion is enhanced. Through analysis utilizing an electron microscope, it is shown that when the BFs added with KH550 (3-Aminopropyltriethoxysilane) were modified by KH560 ((3-Glycidyloxypropyl)trimethoxysilane), the interface layers of BF (basalt fiber)–KH560–NR and BF–KH550–NR were formed, which improves the adhesion between BFs and the rubber matrix. Qualitative characterization experiments on the orientation direction of the vulcanized composites were carried out through the experiments; that is, the qualitative characterization experiments on the segmented cutting and vulcanization of the composites in the radial direction showed that the short-fiber radial-orientation die could greatly improve the radial orientation degree of the short fibers in the radial direction. After adding KH560, the performance of the composites reinforced by the short fibers was improved to a certain extent compared with those without KH560. By adding DZ (N,N-Dicyclohexyl-2-benzothiazolsulfene amide) and CTP(cytidine triphosphate disodium) into the vulcanization system, the curing process of compounds in mixing and extrusion was delayed and the scorching resistance of short-fiber-reinforced composites was enhanced. Under the same conditions, the properties of the compounds after extrusion were greatly improved compared with those without extrusion.

Effect of Vane Extruder on Processability and Mechanical Properties of PBS/Lignin Biocomposites

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

The effect of processing conditions for polylactic acid based fibre composites via twin-screw extrusion

Effects of processing on mechanical properties of polypropylene composites

Extrusion Parameters Optimization and Mechanical Properties of Bio-Polyamide 11-Based Biocomposites Reinforced with Short Basalt Fibers

Rheological, thermal, and mechanical properties of poly(butylene succinate) (PBS)/poly(L-lactide) (PLA) fiber biodegradable green composites

Biocomposite Optimization with NaOH-modified Bagasse Fiber, Polybutylene Succinate, and Poly(Lactic Acid) Using RSM Approach

Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites

Effect of Material Properties on the Foaming Behaviors of PP-Based Wood Polymer Composites Prepared with the Application of Spherical Cavity Mixer

Effect of extruder elements on fiber dimensions and mechanical properties of bast natural fiber polypropylene composites

Effects of the molding process on properties of bamboo fiber/epoxy resin composites

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Effect of processing temperature and polymer types on mechanical properties of bamboo fiber composites

Effects of manufacturing process and surface treatments on mechanical properties of PLA/SCF composites using extrusion printing

Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

Fractionation of technical lignin and its application on the lignin/poly-(butylene adipate-co-terephthalate) bio-composites

Effect of Wet Mixing on Properties of Radial-Orientation Basalt Fiber-Reinforced Rubber Compounds

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Study on the effect of wet mixing process on the properties of EPDM rubber/fiber/hollow glass microsphere composite system

Effect of Extrusion Temperature on the Physico-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling