Abstract:High temperature solution copolymerization of 4,4'-sulfonyl-bis(trifluorovinyloxy)biphenyl (DTS) and 4,4 '-bis(trifluorovinyloxy)biphenyl (DTB) were carried out in diphenyl ether as the solvent. A series of perfluorocyclobutyl copoly(aryl ether)s containing biphenyl and sulfonyl moieties (PFCB-S-BP) were prepared via thermal [2 pi + 2 pi] cycloaddition polymerization by controlling the ratio of DTS to DTB. PFCB-S-BP was synthesized when the ratio of DTS to DTB ranged from 3/7 to 7/3. Molecular weight and its distribution of PFCBS-BP were measured by gel permeation chromatography (GPC). The GPC curves showed a narrow and unimodal elution peak. The number-average molecular weight of PFCB-S-BP was larger than 1.4 x 10(4), with a narrow molecular weight distribution ranging from 1.4 to 1.6. The chemical structures was characterized by Fourier transform infrared spectroscopy Fourier transform infrared spectroscopy (FTIR), hydrogen nuclear magnetic resonance (H-1-NMR) and fluorine nuclear magnetic resonance (F-19-NMR). The characteristic signal of trifluorovinyl ether group of monomers at 1824 cm(-1) disappeared in Fourier transform infrared spectroscopy (FTIR) spectra of PFCB-S-BP and the strong perfluorocyclobutyl group characteristic peak at 957 cm(-1) appeared. The intensities of sulfonyl group characteristic absorption peaks at 1100 and 1315 cm(-1) increased with the increase in the ratio of DTS to DTB. From 1 H-NMR of PFCB-S-BP, the signal at 7.9 was assigned to the protons of benzene ring adjacent to sulfonyl group. The intensity of the signal increased with an increase in the ratio of DTS to DTB. For F-19-NMR of PFCB-S-BP, the multiple peaks ranging from -127 to -134 were ascribed to the cis- and trans-substituted PFCB rings. These results indicated that DTS copolymerized with DTB, and PFCB-S-BP copolymers were successfully synthesized. The thermal property and solubility of PFCB-S-BP were also tested. T-g of PFCB-S-BP increased slightly from 146 degrees C to 153 degrees C with an increase in the ratio of DTS to DTB from 3/7 to 7/3. The decomposition temperature for 5% weight loss of PFCB-S-BP was above 470 degrees C. These results showed that PFCB-S-BP exhibited high thermal stability and was soluble in common organic solvents such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide and chloroform.

Studies on Synthesis and Thermal Properties of Polycarbonate Derived from 9,9-Bis(4-hydroxyphenyl) Fluorene

Colorless Transparent Cyclobutanediol-Based Copolyesters with Excellent Polymerization Robustness, Thermal Stability, and High Performance

Improving the Thermal Properties of Polycarbonate via the Copolymerization of a Small Amount of Bisphenol Fluorene with Bisphenol A

Preparation of high temperature resistant polycarbonate via ionic liquid activation of bisphenol fluorene under mild conditions

Synthesis and Optical Properties of Polycarbonates Copolymerized with Bisphenol Fluorene Moiety

Toward flame-retardant, transparency, and high mechanical property of polycarbonate based on low addition of linear polyborosiloxane

Synthesis and optical properties of co-polycarbonate containing Cardo structure and binaphthalene structure

Comparison of the properties of bioderived polycarbonate and traditional bisphenol-A polycarbonate

Thermal Degradation Behavior and Flame Retardancy of Polycarbonate Containing Poly[(phenylsilsesquioxane)-co-(dimethylsiloxane)] and Potassium Diphenyl Sulfonate

Branched Fluorine/Adamantane Interfacial Compatibilizer for PBO Fibers/Cyanate Ester Wave-Transparent Laminated Composites

The thermal degradation mechanism and kinetic analysis of hydrogenated bisphenol-A polycarbonate

Bromine-containing copolymer polycarbonate for simultaneous thermal stability, transparency, and thin-wall flame-retardant polycarbonate

Synthesis and Characterization of Perfluorocyclobutyl Copoly(aryl ether)s Containing Biphenyl and Sulfonyl Moieties

Synthesis and characterization of poly(bisphenol A-phenylphosphonate)

Degradation and Stabilization of Polycarbonate during High Temperature Shearing

High thermal resistance amorphous copolyesters synthesized from bio‐based 2,5‐furandicarboxylic acid

Synthesis of polycarbonate in supercritical CO_2

Synthesis and Characterization of Phosphorus-Containing Liquid Crystalline Copolyesters Based on Biphenyl-4, 4 '-Dicarboxylic Acid

Optical characteristics and mechanism analysis of polycarbonate/poly(1,4-cyclohexanedimethyl-1,4-cyclohexanedicarboxylate) blends

Synthesis and thermal decomposition of a novel hyperbranched polyphosphate ester used for flame retardant systems

Effect of polycarbonate (PC) content on the mechanical properties, morphology and transesterification mechanism of PBT/PC immiscible blends