Abstract:The recent interest in developing low-cost, biocompatible, and lightweight bioelectronic devices has focused on organic electrochemical transistors (OECTs), which have the potential to fulfill these requirements. In this study, three types of poly(3-hexylthiophene) (P3HT)-based block copolymers (BCPs) incorporating different insulating blocks (poly(nbutyl acrylate) (PBA), polystyrene, and poly(ethylene oxide) (PEO)) were synthesized for application in OECTs. The morphological, crystallographic, and electrochemical properties of these BCPs are systematically investigated. Accordingly, P3HT-b-PBA demonstrates superior performance in the KCl-based aqueous electrolyte, with a higher product of mobility and capacitance (μC*) at 170 F s-1 cm-1 V-1 than that of the P3HT homopolymer at 58 F s-1 cm-1 V-1. P3HT-b-PBA exhibits better stability over 50 ON/OFF switching cycles than do other BCPs and P3HT homopolymers. With regard to the performance in the KPF6-based aqueous electrolyte, P3HT-b-PBA outperforms with a higher μC* of 9.2 F s-1 cm-1 V-1 than that of 8.6 F s-1 cm-1 V-1 observed from P3HT. Notably, both polymers exhibited almost no decay in device performance over 110 ON/OFF switching cycles. The strongly different performance of polymers in these two electrolytes is due to the side chain's hydrophobicity and interdigitated lamellar structures, thereby retarding the doping kinetics of the highly hydrated Cl- ions compared with the slightly hydrated PF6- ions. Concerning the improved performance of P3HT-b-PBA, this is attributed to its soft and hydrophobic backbone. Our morphological and crystallographic analyses reveal that P3HT-b-PBA experiences minimal structural disorder when swelled by the electrolyte, maintaining its original structure better than the P3HT homopolymer and the hydrophilic BCP of P3HT-b-PEO. The hydrophobic nature of P3HT-b-PBA contributes to the stability of its backbone structure, ensuring enhanced capacitance during the operation of the OECT operation. These findings provide reassurance about the stability and performance of P3HT-b-PBA in the field of OECT applications. In summary, this study represents the first exploration of P3HT-based BCPs for OECT applications and investigates their structure-performance relationships in mixed ionic-electronic conductors.

Polymerization of Solid-State 2,2′-Bithiophene Thin Film or Doped in Cellulose Paper Using DBD Plasma and Its Applications in Paper-Based Electronics

Polymerization of Solid-State Aminophenol to Polyaniline Derivative Using a Dielectric Barrier Discharge Plasma

Bulk Polymerization of Acrylic Acid Using Dielectric-Barrier Discharge Plasma in a Mesoporous Material.

Cover Picture: Facile Solid‐State Synthesis of Highly Conducting Poly(ethylenedioxythiophene) (angew. Chem. Int. Ed. 6/2003)

Low Potential Electropolymerization Of Anisotropic Conductive Polythiophene Films And Fabrication Of Electrical Devices

Design of Novel Functional Conductive Structures and Preparation of High-Hole-Mobility Polymer Transistors by Green Synthesis Using Acceptor–Donor–Acceptor Strategies

Solid-State Synthesis of a Conducting Polythiophene Via an Unprecedented Heterocyclic Coupling Reaction

Towards Practical Application of Paper based Printed Circuits: Capillarity Effectively Enhances Conductivity of the Thermoplastic Electrically Conductive Adhesives

Synthesis and characterization of a liquid-like polythiophene and its potential applications

Low bandgap copolymer of 1,4-diketopyrrolo[3,4-c]pyrrole and thieno[3,2-b]thiophene: Synthesis and applications in polymer solar cells and field-effect transistors

Thin Functional Polymer Films by Electropolymerization

High‐quality Polythiophene Films Prepared by Electropolymerization of Thiophene in BF3‐ethyl Ether Solution

Efficiently tuning the electrical performance of PBTTT-C14 thin film via in-situ controllable multiple precursors (Al2O3:ZnO) vapor phase infiltration

Multifunctional Poly(3,4-ethylenedioxythiophene)/Crystalline Nanofibrous Cellulose Composites for Eco-Friendly and Sustainable Electronics

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)

Interfacial Stabilization of Organic Electrochemical Transistors Conferred Using Polythiophene-Based Conjugated Block Copolymers with a Hydrophobic Coil Design

Conductive Polymer Synthesis with Single-Crystallinity via a Novel Plasma Polymerization Technique for Gas Sensor Applications

Greatly increased electrical conductivity of PBTTT-C14 thin film via controllable single precursor vapor phase infiltration

A prime synergistic BC@PPy flexible conductive matrix proposed candidate for boosting the breakthrough in smart e-textiles power supplies

Synthesis of a Conjugated Polymer with Broad Absorption and Its Application in High-Performance Phototransistors

Remarkable Enhancement of Thermoelectric Performance of Semicrystalline Polymer Films Upon Incorporating A Nucleating Agent Additive