Abstract:The recent interest in developing low-cost, biocompatible, and lightweight bioelectronic devices has focused on organic electrochemical transistors (OECTs), which have the potential to fulfill these requirements. In this study, three types of poly(3-hexylthiophene) (P3HT)-based block copolymers (BCPs) incorporating different insulating blocks (poly(nbutyl acrylate) (PBA), polystyrene, and poly(ethylene oxide) (PEO)) were synthesized for application in OECTs. The morphological, crystallographic, and electrochemical properties of these BCPs are systematically investigated. Accordingly, P3HT-b-PBA demonstrates superior performance in the KCl-based aqueous electrolyte, with a higher product of mobility and capacitance (μC*) at 170 F s-1 cm-1 V-1 than that of the P3HT homopolymer at 58 F s-1 cm-1 V-1. P3HT-b-PBA exhibits better stability over 50 ON/OFF switching cycles than do other BCPs and P3HT homopolymers. With regard to the performance in the KPF6-based aqueous electrolyte, P3HT-b-PBA outperforms with a higher μC* of 9.2 F s-1 cm-1 V-1 than that of 8.6 F s-1 cm-1 V-1 observed from P3HT. Notably, both polymers exhibited almost no decay in device performance over 110 ON/OFF switching cycles. The strongly different performance of polymers in these two electrolytes is due to the side chain's hydrophobicity and interdigitated lamellar structures, thereby retarding the doping kinetics of the highly hydrated Cl- ions compared with the slightly hydrated PF6- ions. Concerning the improved performance of P3HT-b-PBA, this is attributed to its soft and hydrophobic backbone. Our morphological and crystallographic analyses reveal that P3HT-b-PBA experiences minimal structural disorder when swelled by the electrolyte, maintaining its original structure better than the P3HT homopolymer and the hydrophilic BCP of P3HT-b-PEO. The hydrophobic nature of P3HT-b-PBA contributes to the stability of its backbone structure, ensuring enhanced capacitance during the operation of the OECT operation. These findings provide reassurance about the stability and performance of P3HT-b-PBA in the field of OECT applications. In summary, this study represents the first exploration of P3HT-based BCPs for OECT applications and investigates their structure-performance relationships in mixed ionic-electronic conductors.

A prime synergistic BC@PPy flexible conductive matrix proposed candidate for boosting the breakthrough in smart e-textiles power supplies

Design and Optimization of Flexible Polypyrrole/Bacterial Cellulose Conductive Nanocomposites Using Response Surface Methodology

Biodegradable, Robust, and Conductive Bacterial Cellulose @Ppy-P Macrofibers As Resistive Strain Sensors for Smart Textiles

Highly conductive and stretchable conductors fabricated from bacterial cellulose

Bacterial cellulose composites (MXene@TOBC@PPy) for flexible supercapacitors with improved electrochemical performance

Synthesis of Percolative Hyperelastic Conducting Composite and Demonstrations of Application in Wearable Strain Sensors

PPDA hybrid: a flexible and biocompatible platform for supercapacitor and strain sensing applications

A Sustainable and Eco-Friendly Membrane for PEM Fuel Cells Using Bacterial Cellulose

Synergistic promotion between tolerant polymer electrode and super-conductive polyelectrolyte enables anti-damage transient wearable electronics

Green synthesis of boehmite-reinforced cashew gum/polypyrrole biopolymer blend for advanced biomaterials

Enzymatic synthesis of biocompatible polypyrrole with enhanced electrochemical properties for supercapacitors

Electrically Conductive Polyester and Cellulose Based Composites: Fabrication, Characterization and in Vitro Biocompatibility

A universal construction of robust interface between 2D conductive polymer and cellulose for textile supercapacitor

Multifunctional Textile Electronic with Sensing, Energy Storing, and Electrothermal Heating Capabilities

Interfacial Stabilization of Organic Electrochemical Transistors Conferred Using Polythiophene-Based Conjugated Block Copolymers with a Hydrophobic Coil Design

Advanced Flexible Wearable Electronics from Hybrid Nanocomposites Based on Cellulose Nanofibers, PEDOT:PSS and Reduced Graphene Oxide

Ultrastretchable and wearable conductive multifilament enabled by buckled polypyrrole structure in parallel

Aqueous Processable One-Dimensional Polypyrrole Nanostructured by Lignocellulose Nanofibril: A Conductive Interfacing Biomaterial

Design of BCNO@PPy composites for efficient microwave absorption and thermal management

A Simple and Effective Physical Ball‐Milling Strategy to Prepare Super‐Tough and Stretchable PVA@MXene@PPy Hydrogel for Flexible Capacitive Electronics

Electrothermal Phase Change Composite with Flexibility over a Wide Temperature Range for Wearable Thermotherapy