Abstract:For future pollution-free renewable energy production, platinum group metal (PGM)-free electrocatalysts are highly required for oxygen reduction reaction (ORR) to avoid all possible Fenton reactions and to make fuel cell more economical. Therefore, in this study, to overcome traditional electrocatalyst limitations, we applied facile method to synthesize robust mesoporous CrN-reduced graphene oxide (rGO) nanocomposite with MnO (thereafter, Cr/rGO composite with MnO) as an electrocatalyst by efficient one-step sol-gel method by ammonolysis at 900°C for 9 h. Synthesized porous structures of Cr/rGO nanocomposite with MnO have the highest estimated surface area of 379 m2·g−1, higher than that of the carbon black (216 m2·<math>gcat-1</math>) support, and almost uniform pore size distribution of about 4 nm. The Cr/rGO nanocomposites with MnO exhibit enhanced electrocatalytic ORR properties with estimated high half-wave potential of 0.89 V vs. the reversible hydrogen electrode (RHE) and current density of 5.90 mA·cm−2, compared with that of benchmark 20% Pt/C electrode (0.84 V, 5.50 mA·cm−2), with noticeable methanol tolerance and significantly enhanced stability in alkaline media. Hence, the Cr/rGO nanocomposites with MnO showed superior performance to 20 wt.% Pt/C; their half-wave potentials were 50 mV high, and the limiting current density was 0.40 mA·cm−2 high. In alkaline anion exchange membrane fuel cell (AAEMFC) setup, this cell delivers a power density of 309 mW·cm−2 for Cr/rGO nanocomposite with MnO, demonstrating its potential use for energy conversion applications. The nanosized Cr/rGO metallic crystalline nanocomposites with MnO gave a large active surface area owing to the presence of rGO, which also has an effect on the charge distribution and electronic states. Hence, it may be the reason that Cr/rGO nanocomposites with MnO, acting as more active and more stable catalytic materials, boosted the electrocatalytic properties. The synergistic consequence in nanosized Cr/rGO composite with MnO imparts the materials' high electron mobility and thus robust ORR activity in 0.1 M of KOH solution. This potential method is highly efficient for synthesis of large-scale, non-noble-metal-based electrocatalytic (NNME) materials (i.e., Cr/rGO nanocomposite with MnO) on the gram level and is efficient in preparing novel, low-cost, and more stable non-PGM catalysts for fuel cells.

A Superior Oxygen Reduction Reaction Electrocatalyst Based on Reduced Graphene Oxide and Iron(II) Phthalocyanine-Supported Sub-2 Nm Platinum Nanoparticles

A High-Performance Electrocatalyst For Oxygen Reduction Based On Reduced Graphene Oxide Modified With Oxide Nanoparticles, Nitrogen Dopants, And Possible Metal-N-C Sites

Low-Loading Cobalt Coupled With Nitrogen-Doped Porous Graphene As Excellent Electrocatalyst For Oxygen Reduction Reaction

Interconnected 3D Fe3O4/rGO as highly durable electrocatalyst for oxygen reduction reaction

Reduced-Graphene-Oxide with Dispersed Au-Ir Nanoparticles as Active Support for Pt at low Loadding for Electrocatalytic Oxygen Electroreduction

Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework

3D Edge-Enriched Fe3 C@C Nanocrystals with a Core-Shell Structure Grown on Reduced Graphene Oxide Networks for Efficient Oxygen Reduction Reaction.

Cobalt- and iron-coordinated graphitic carbon nitride on reduced graphene oxide: A nonprecious bimetallic M–N –C analogue electrocatalyst for efficient oxygen reduction reaction in acidic media

Superior Catalytic Activity of Electrochemically Reduced Graphene Oxide Supported Iron Phthalocyanines Toward Oxygen Reduction Reaction

An Efficient Bio-inspired Oxygen Reduction Reaction Catalyst: MnO X Nanosheets Incorporated Iron Phthalocyanine Functionalized Graphene

Single Fe Atoms Anchored by Short-Range Ordered Nanographene Boost Oxygen Reduction Reaction in Acidic Media

Highly dispersed MnO nanoparticles supported on N-doped rGO as an efficient oxygen reduction electrocatalyst via high-temperature pyrolysis

Carbon material loaded with platinum and iron oxide nanoparticles as a low-platinum catalyst for oxygen reduction reaction

High performance iron-based oxygen reduction catalyst supported on sengon wood-derived reduced graphene oxide in acidic medium

Porphyrinic Metal-Organic Framework-Templated Fe-Ni-P/Reduced Graphene Oxide for Efficient Electrocatalytic Oxygen Evolution.

Facile Fabrication of Nickel Supported on Reduced Graphene Oxide Composite for Oxygen Reduction Reaction

An Efficient Electrocatalyst (PtCo/C) for the Oxygen Reduction Reaction

Highly Dispersed and Small-Size Pd–Cu Nanoparticles Supported on N-Doped Graphene for Oxygen Reduction Reaction Catalysts

CoNx/NiFeOx/nitrogen-doping reduced graphene oxide nanocomposite derived from layered double hydroxide precursor as an efficient bifunctional electrocatalyst for oxygen electrocatalytic reactions

Novel Two-Dimensional Carbon–Chromium Nitride-Based Composite as an Electrocatalyst for Oxygen Reduction Reaction

Reduced Graphene Oxide-Supported Iron-Cobalt Alloys as High-Performance Catalysts for Oxygen Reduction Reaction