Abstract:Fuel cells are gaining worldwide attention as an acceptable technology for achieving carbon neutrality. However, existing fuel cells use large amounts of precious metals, which limits their widespread adoption. Precious metal-free fuel cells have been studied in our laboratory. The oxidation-reduction reaction (ORR) at the cathode of the fuel cell must start at a higher potential and proceed smoothly in a four-electron reduction reaction without producing hydrogen peroxide 1,2 . We have synthesized iron-based complex catalysts using the method reported by Plamen Atanassov 3 et al. Iron nitrate dihydrate is mixed in aqueous solution with glucose, 2-methylimidazole, and zinc nitrate hexahydrate, followed by hydrothermal synthesis at 200°C for 24 hours. It is then acid-treated with nitric acid to dissolve excess metallic iron, and the process is repeated twice at 950°C to complete the Fe-N-C catalyst. However, SEM and XRD analysis confirmed the presence of large amounts of metallic iron. In response to these results, the synthetic process of the Fe-N-C catalyst was repeatedly improved, and the prepared catalyst was subjected to in-situ XAFS (X-ray absorption fine structure) analysis using synchrotron radiation at SPring-8 (Fig. 1). The peak around 7110 eV is significantly different from that of metallic iron (Fe foil), indicating that iron complex, iron phthalocyanine (II), and it is like the peak of iron phthalocyanine (II), confirming that the prepared Fe-N-C catalyst forms a good complex. The performance of the Fe-N-C catalyst with the confirmed complexation was then investigated, and a cathode that exhibited ORR performance comparable to that of the Pt catalyst was successfully synthesized (Fig. 2). In the future, further improvement of the catalyst preparation process will be discussed to develop a catalyst with much better performance than Pt. Reference 1 N. Yamamoto, D.Matsumura, Y. Hagihara, K.Tanaka, Y. Hasegawa, K. Ishii, H. Tanaka, “Investigation of hydrogen superoxide adsorption during ORR on Pt/C catalyst in acidic solution for PEFC by in-situ high energy resolution XAFS”, Jounal of Power Sources , 557, 15, (2023), 232508 2 S. Kusano, D. Matsumura, K. Ishii, H. Tanaka, J. Mizuki, “Electrochemical Absorption on Pt Nanoparticles in alkaline Solution Observed Using in-situ High Energy Resolution X-ray Absorption Spectroscopy”, Nanomaterials , 9, 4, (2019), 642 3 R. Gokhale, L-K. Tsui, K. Roach, Y. Chen, M. M. Hossen, K. Artyushkova, F. Garzon, p. Atanassov, “Hydrothermal synthesis of platinum-Group-Metal-Free Catalysts: Structural Elucidation and Oxygen Reduction Catalysis”, ChemElectroChem , 5, 14, (2017), 1848-1853 Figure 1

High performance iron-based oxygen reduction catalyst supported on sengon wood-derived reduced graphene oxide in acidic medium

High-Loading Cobalt Oxide Coupled with Nitrogen-Doped Graphene for Oxygen Reduction in Anion-Exchange-Membrane Alkaline Fuel Cells

Highly Porous Iron-Doped Nitrogen–Carbon Framework on Reduced Graphene Oxide as an Excellent Oxygen Reduction Catalyst for Proton-Exchange Membrane Fuel Cells

CoOx-Fe3O4/N-rGO Oxygen Reduction Catalyst for Anion-Exchange Membrane Fuel Cells

Cobalt- and iron-coordinated graphitic carbon nitride on reduced graphene oxide: A nonprecious bimetallic M–N –C analogue electrocatalyst for efficient oxygen reduction reaction in acidic media

Multi-role Graphitic Carbon Nitride-Derived Highly Porous Iron/nitrogen Co-Doped Carbon Nanosheets for Highly Efficient Oxygen Reduction Catalyst

A High-Performance Electrocatalyst For Oxygen Reduction Based On Reduced Graphene Oxide Modified With Oxide Nanoparticles, Nitrogen Dopants, And Possible Metal-N-C Sites

A Superior Oxygen Reduction Reaction Electrocatalyst Based on Reduced Graphene Oxide and Iron(II) Phthalocyanine-Supported Sub-2 Nm Platinum Nanoparticles

Interconnected 3D Fe3O4/rGO as highly durable electrocatalyst for oxygen reduction reaction

Scalable Synthesis of N–Doped Graphene–Oxide–Supported FeCo(OH)x Nanosheets for Efficient Co–Doped Fe3O4 Nanoparticle-Based Oxygen Reduction Reaction Electrocatalysis

Improvement of Oxygen Reduction Reaction Performance of Fe-N-C Catalyst

3D Porous Fe/N/C Spherical Nanostructures As High-Performance Electrocatalysts for Oxygen Reduction in Both Alkaline and Acidic Media.

Atomically Dispersed Fe‐Nx/C Electrocatalyst Boosts Oxygen Catalysis Via a New Metal‐Organic Polymer Supramolecule Strategy

Fabrication of interface-engineered Ni/NiO/rGO nanobush for highly efficient and durable oxygen reduction

Porous Hierarchical Iron/Nitrogen Co‐doped Carbon Etched by G‐c3n4 Pyrolysis As Efficient Non‐noble Metal Catalysts for PEM Fuel Cells

Dual optimization strategy to construct hierarchical reticulated porous framework with enriched Fe-NX active species for the highly efficient oxygen reduction reaction

Hierarchical Flowerlike Highly Synergistic Three-Dimensional Iron Tungsten Oxide Nanostructure-Anchored Nitrogen-Doped Graphene as an Efficient and Durable Electrocatalyst for Oxygen Reduction Reaction.

A highly active and durable iron/cobalt alloy catalyst encapsulated in N-doped graphitic carbon nanotubes for oxygen reduction reaction

Well‐Combined Magnetically Separable Hybrid Cobalt Ferrite/Nitrogen‐Doped Graphene as Efficient Catalyst with Superior Performance for Oxygen Reduction Reaction

Synergistic Enhancement Of Electrocatalytic Activity Toward Oxygen Reduction Reaction In Alkaline Electrolytes With Pentabasic (Fe, B, N, S, P)-Doped Reduced Graphene Oxide

Iron Carbide Nanoparticles Encapsulated in Mesoporous Fe-N-Doped Graphene-Like Carbon Hybrids As Efficient Bifunctional Oxygen Electrocatalysts.