Abstract:Abstract Aluminum can enhance heat release of energetic composite in theory. However, the commonly used micron aluminum powder has several short comings like incomplete reaction and low reaction rate. Meanwhile, outer oxide shell of nano Al particle is thicker than micro Al, which leads to low active aluminum content and insufficient heat release. On the basis of previous research, reported fluoropolymers modified Al particles were compared and suitable F2311was chosen. Sub-micron scale Al (median particle size around 200 nm) was regarded as optimum coated object in consideration of activity content of aluminum powder changing with particle size. The super fine Al powder was prepared by electrical explosion method, and encapsulated in situ by selected fluorine rubber F2311. The experiments on thermal stability demonstrated F2311 coating thickness should be no less than 3.6 nm. These results were further confirmed by EXPLO5 thermo dynamic calculation. Calculated results showed that reaction characters of F2311 encapsulated Al exceeded conventional nano Al regardless of combustion and explosion. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser particle size analyzer and X-ray photoelectron spectroscopy (XPS) were used to characterize coated products’ morphology, particle size distribution and interfacial bonding information. The results showed that the coated samples were generally spherical shape, with median particle size of 217.7 nm and coating thickness of 3.6 nm. The coating shell contained a small amount of alumina and aluminum fluoride besides fluoropolymer. The non-isothermal dynamic equations of Al/F2311 and Al/Al 2 O 3 were deduced by TG/DSC simultaneous thermal analysis. Compared with conventional nano-Al, the apparent activation energy of Al/F2311 decreased by 45 kJ/mol and the first exothermic peak temperature was about 10 °C earlier. Moreover, heat release was nearly twice as conventional nano-Al. TG-DSC-MS coupled measurements certified that active Al was enveloped by ‘fluorine atmosphere’ while F2311 decomposed in range of 200–400 °C. Alumina was replaced with aluminum fluoride inside coating layer during 400–550 °C, which broadened the diffusion path and then accelerated the permeation of oxidizing gas. In addition, the exothermic of Al-F was obviously larger than Al-O. Consequently, the oxidation reaction was activated rapidly, especially in initial exothermic period. Fluoropolymer encapsulated sub-micron sized Al was a latent highly activity energetic fuel and a potential candidate for aluminum powder.

Ultrathin Zirconia Passivation and Stabilization of Aluminum Nanoparticles for Energetic Nanomaterials via Atomic Layer Deposition

Stability of TiO 2 Nanoparticles in Deionized Water with ZrP Nanoplatelets

Synthesis, Analysis, and Characterization of Aluminum Nanoparticles Coated with 2,2,4-Trimethylpentane

Superhydrophobic Fluorine‐Containing Protective Coating to Endow Al Nanoparticles with Long‐Term Storage Stability and Self‐Activation Reaction Capability

Enhanced water resistance and energy performance of core–shell aluminum nanoparticles via in situ grafting of energetic glycidyl azide polymer

Surface Passivation of Fe3o4 Nanoparticles with Al2o3 Via Atomic Layer Deposition in A Rotating Fluidized Bed Reactor

An efficient PDA/Al2O3 nanosheets reinforced ultra-thin ZrO2 coating with attractive anti-corrosion and deuterium resistance property

Stabilization of the Energetic Al Powder Through Uniform and Controlled Surface Coating for Promoting Its Energy Output

Surface Passivation of Aluminum Hydride Particles Via Atomic Layer Deposition

Improved ignition and combustion performances of aluminum nanoparticles by in-situ partial conversion of native alumina to surface Al-MOF shell

A latent highly activity energetic fuel: thermal stability and interfacial reaction kinetics of selected fluoropolymer encapsulated sub-micron sized Al particles

Ultra. Ne Platinum Nanoparticles In Zirconia Nano Films: Preparation And Thermal Stability

(Digital Presentation) Controllable Preparation of Ultrasmall Pt-Based Intermetallic Nanocrystals Via Atomic Layer Deposition for Hydrogen Fuel Cell

Energetic and Protective Coating via Chemical and Physical Synergism for High Water-Reactive Aluminum Powder

Green Nanocoatings Based on the Deposition of Zirconium Oxide: The Role of the Substrate

Thermal Data of Perfluorinated Carboxylic Acid Functionalized Aluminum Nanoparticles

Effect of Isothermal Oxidation on the Structural Properties of (Ni,Pt)Al Coatings Doped with Zr at 1150 °C

Enhanced ablation resistance of ZrC–ZrO2 nanocomposite ceramic coating on TiAlNb medium-entropy alloy prepared by a novel strategy

The Effect of Organic Matter from Sewage Sludge as an Interfacial Layer on the Surface of Nano-Al and Fluoride

Effect of nano-oxides on corrosion resistance of Al2O3–ZrO2–C material

Novel aluminum-based fuel: Facile preparation to improve thermal reactions