Abstract:A novel magnetic NiFe2O4/Zn-Al layered double hydroxide intercalated with EDTA composite (NiFe2O4/ZnAl-EDTA LDH) was prepared through modified coprecipitation method and employed for adsorptive removal of Cr(VI) from aqueous solution. The adsorbents were characterized using Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and X-ray photoelectron spectroscopy (XPS). Factors affecting the Cr(VI) adsorption, such as initial solution pH, adsorbent dosage, contact time, initial Cr(VI) concentration, temperature and coexisting ions, were studied systematically. Experiments results show that the magnetic NiFe2O4/ZnAl-EDTA LDH exhibits high adsorption efficiency within a wide pH range of 3.0–7.0 (R>80% at Cr(VI) concentration 50mgL−1, contact time 360min, and adsorbent dosage 2g/L) and quick separation property. The adsorption process is fitted well with the Langmuir isotherm and pseudo-second-order kinetic model. The maximum theoretical adsorption capacity is found to be 77.22mgg−1 at pH 6.0 and 318K. The positive ΔH value (2.907kJmol−1) and negative ΔG value (−4.722kJmol−1) at 298–318K reveals that the adsorption process is feasible, spontaneous and endothermic. Coexisting anions (PO43-, SO42−, CO32−, HCO3−, Cl−, and NO3−) have no significant effect on Cr(VI) removal. The mechanism study indicates that the adsorption of Cr(VI) onto NiFe2O4/ZnAl-EDTA LDH mainly involves electrostatic attraction and ion exchange interaction. It is interesting to note that a proportion of Cr(VI) adsorbed on the adsorbent surface are reduced to Cr(III) during the adsorption process. Results from this study demonstrate the potential utility of the magnetic NiFe2O4/ZnAl-EDTA LDH that could be developed into a viable technology for efficient removal of Cr(VI) from aqueous solution.

Fabrication of Magnetic Fe/Zn Layered Double Oxide@Carbon Nanotube Composites and Their Application for U(VI) and Am-241(III) Removal

Fabrication of Magnetic Fe/Zn Layered Double Oxide@Carbon Nanotube Composites and Their Application for U(VI) and 241am(iii) Removal

Enhanced Adsorption of U(VI) and 241am(iii) from Wastewater Using Ca/Al Layered Double Hydroxide@carbon Nanotube Composites.

Synthesis of Novel Flower-Like Layered Double Oxides/carbon Dots Nanocomposites for U(VI) and 241am(iii) Efficient Removal: Batch and EXAFS Studies

Gamma-ferric oxide nanoparticles decoration onto porous layered double oxide belts for efficient removal of uranyl.

Functionalization of Mesoporous Fe3O4@SiO2 Nanospheres for Highly Efficient U(VI) Adsorption

Magnetic CNT-based electrode for efficient electro-adsorption of uranium

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Removal of uranium(VI) from aqueous solution by Mg(OH)2-coated nanoscale zero-valent iron: Reactivity and mechanism

Fabrication of a Novel NiFe2O4/Zn-Al Layered Double Hydroxide Intercalated with EDTA Composite and Its Adsorption Behavior for Cr(VI) from Aqueous Solution

Magnetic Fe3O4 assembled on nZVI supported on activated carbon fiber for Cr(VI) and Cu(II) removal from aqueous solution through a permeable reactive column

Efficient U(VI) removal by Ti3C2Tx nanosheets modified with sulfidated nano zero-valent iron: Batch experiments, mechanism, and biotoxicity assessment

Fabrication of Magnetic Cu2O Nanocomposites for Enhanced Iodide Removal: Adsorption Properties, Mechanism and Application

Superior Immobilization of U(VI) and 243am(iii) on Polyethyleneimine Modified Lamellar Carbon Nitride Composite from Water Environment

Synthesis and Application of Magnetic Graphene/iron Oxides Composite for the Removal of U(VI) from Aqueous Solutions

Fabrication of β-cyclodextrin conjugated magnetic HNT/iron oxide composite for high-efficient decontamination of U(VI)

Fabrication of amino-functionalized Ce/Mn bimetallic organic framework and its efficient performance on Uranium(VI) extraction in aqueous solutions

Controllable Synthesis of Ca-Mg-Al Layered Double Hydroxides and Calcined Layered Double Oxides for the Efficient Removal of U(VI) from Wastewater Solutions

Solvent-free engineering of Fe0/Fe3C nanoparticles encased in nitrogen-doped carbon nanoshell materials for highly efficient removal of uranyl ions from acidic solution

Simple construction of the α-MnO 2 @ZIF-8 nanomaterial with highly enhanced U(VI) adsorption performance and assessed removal mechanism

Rational design of MOF@COF composites with multi-site functional groups for enhanced elimination of U(VI) from aqueous solution