Abstract:Electroless nickel composite coatings have the potential for high-temperature tribological applications, and a combination of high wear resistance and low friction factor is one of the desirable solutions but still a tricky problem. The addition of self-lubricating WS2 and hard Si3N4 nanoparticles to the Ni-P coatings is expected to obtain good high-temperature tribological performance. In this work, Ni-P-Si3N4-WS2 composite coatings with various contents of WS2 nanoparticles were prepared using electroless plating and subsequently annealed at 400 °C in an inert atmosphere. The tribological properties of the coatings were evaluated using a ball-on-disc wear instrument at operating temperatures from 25 to 600 °C. The microstructure, chemical composition, and surface morphology of the coatings were characterized by X-ray diffractometry (XRD), energy disperse spectroscopy (EDS), and scanning electron microscopy (SEM). Upon increasing the WS2 dosage in the bath, the WS2 content in the coating increased and the micro-hardness of the as-plated coating increased from 539 to 717 HV. After heat treatment, the coating underwent a crystallization process, and the hardness increased from 878 to 1094 HV. The main wear mechanism of the coating changed from adhesive wear in the as-plated state to abrasive wear in the annealed state. The annealed Ni-P-Si3N4-WS2 coating with a WS2 dosage of 2.5 g/L in the bath exhibited excellent mechanical properties, with a hardness of 10.9 GPa, a friction coefficient of ~0.51, and a wear rate of 8.4 × 10−15 m3N−1×m−1 at room temperature, and maintained optimal performance at high temperatures. At operating temperatures of 200, 400, and 600 °C, the form of wear was adhesive wear for coatings with a WS2 dosage < 1.5 g/L and abrasive wear for coatings with a WS2 dosage ≥ 1.5 g/L. The synergism of WS2 and Si3N4 particles refined the grains of the Ni-P matrix in as-plated coatings and obviously reduced the friction coefficient of friction pairs in annealed coatings at all operating temperatures.

WS2 Nanopowders As High-Temperature Lubricants: an Experimental and Theoretical Study

Nano-crystallization-Driven High Temperature Self-lubricating Properties of Magnetron-Sputtered WS2 Coatings

Elevated-temperature Super-Lubrication Performance Analysis of Dispersion-Strengthened WSN Coatings: Experimental Research and First-Principles Calculation

Enhancing High-Temperature Wear Resistance by Constructing the Amorphous-Crystal Heterointerface Structure in WO3/TiO2 Composite Coatings

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

Tribological Performance of High Temperature Grease Containing WS_2 Submicron Particles

Study of Tribological Characteristics of WS2 in High Temperature Lubricating Grease

High Temperature Superlubricity Behaviors Achieved by AlSiN Coatings Against WS2 Coatings at 600 °C

Excellent Tribological Performance at Elevated Temperatures and Associated Mechanisms of Novel AlCoCrFeNi-MoS2 Solid Self-Lubricating Composite

High Temperature Tribological Behavior of Electroless Plating Ni-P-Si3N4-WS2 Composite Coatings

Improving the Lubrication of WSNb Nanocomposite Coatings by the In-Situ Oxygen Shielding Effect at Elevated Temperatures: A Combined Study with Density Functional Theory Simulations

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Dry sliding tribological properties of Cu-WS 2 self-lubricating composites at 25–500 °C

Tribological Properties of WS2 Composite Film Prepared by a Two-Step Method

Enhancing Mechanical Performance and High-Temperature Lubrication Enabled by MoS2/WB2 Nanolayered Films

Synergetic Lubricating Effect of WS2 and Ti3SiC2 on Tribological Properties of Ni3Al Matrix Composites at Elevated Temperatures

Facile method preparation of oil-soluble tungsten disulfide nanosheets and their tribological properties over a wide temperature range

Effect of Superfine WS_2 Powder on Performances of High Temperature Lithium Complex Grease

Preparation and Tribological Properties of WS2 Solid Lubricating Coating with Dense Structure Using HiPIMS

High‐Temperature Wettable Water‐Based Lubricants toward Hot Rolling Lubrication

Tribological Behavior of WS2 Nanoparticles as Additives in Calcium Sulfonate Complex–Polyurea Grease