Abstract:All-inorganic wide-bandgap perovskite CsPbI2Br has attracted much attention because of its inherent thermal stability and ideal bandgap for the front subcell of tandem solar cells (TSCs). However, the low power conversion efficiency (PCE) and poor moisture stability of CsPbI2Br still restrict its future commercialization. Herein, zirconium tetrachloride (ZrCl4) was doped into CsPbI2Br films to modulate the crystal growth and improve the film quality. The partial substitution of the B-site Pb2+ of CsPbI2Br with Zr4+ suppresses the unwanted phase conversion from the crystallized black α-phase to the δ-phase, resulting in improved phase stability. Consequently, the humidity and thermal stability of the film are greatly improved. Additionally, the incorporation of ZrCl4 suppresses nonradiative recombination and forms a matched energy-level alignment with the hole-transport layer (Spiro-OMeTAD). Benefiting from these features, the ZrCl4-doped CsPbI2Br perovskite solar cell (PSC) shows an outstanding efficiency of 16.60% with a high open-circuit voltage of 1.29 V. The unencapsulated devices simultaneously show excellent humidity and thermal stability, retaining over 91% of PCEinitial after 1000 h of aging in ambient air conditions and 92% PCEinitial after 500 h of continuous heating at 85 °C in a nitrogen environment, respectively. Furthermore, ZrCl4-doped CsPbI2Br was employed as the front subcell of perovskite/organic TSCs and achieved a remarkable PCE of 19.42%, showing great potential for highly efficient and stable TSCs.

Mn Doping of CsPbI3 Film Towards High-Efficiency Solar Cell

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Enhancing Optical, Electronic, Crystalline, and Morphological Properties of Cesium Lead Halide by Mn Substitution for High‐Stability All‐Inorganic Perovskite Solar Cells with Carbon Electrodes

High-Performance CsPbI2Br Perovskite Solar Cells with Zinc and Manganese Doping

Monovalent Copper Cation Doping Enables High-Performance CsPbIBr2-Based All-Inorganic Perovskite Solar Cells

Enhancing the Optical, Morphological and Electronic Properties of the Solution-Processed CsPbIBr2 Films by Li Doping for Efficient Carbon-Based Perovskite Solar Cells

Natrium Doping Pushes the Efficiency of Carbon-Based CsPbI3 Perovskite Solar Cells to 10.7

Enhancement of thermal stability for perovskite solar cells through cesium doping

Mono- and Co-Doped Mn-Doped CsPbCl3 Perovskites with Enhanced Doping Efficiency and Photoluminescent Performance

Doping Mechanism of Perovskite Films with PbCl<sub>2</sub> Prepared by Magnetron Sputtering for Enhanced Efficiency of Solar Cells

Toward Efficient and Air-Stable Carbon-Based All-Inorganic Perovskite Solar Cells Through Substituting CsPbBr3 Films with Transition Metal Ions

Zirconium Doping to Enable High-Efficiency and Stable CsPbI2Br All-Inorganic Perovskite Solar Cells.

Interstitial Mn2+-Driven High-Aspect-Ratio Grain Growth for Low-Trap-Density Microcrystalline Films for Record Efficiency CsPbI2Br Solar Cells

Stable high efficiency two-dimensional perovskite solar cells via cesium doping

Doping Mechanism of Perovskite Films with PbCl2 Prepared by Magnetron Sputtering for Enhanced Efficiency of Solar Cells

Structure Optimization of CH3NH3PbI3 by Higher-Valence Pb in Perovskite Solar Cells with Enhanced Efficiency and Stability

Effective N-Type De-Doping of Perovskite Surface Via Defect Passivation and Improved Film Crystallization for High-Efficiency Inorganic Solar Cells

Inhibiting Ion Migration by Guanidinium Cation Doping for Efficient Perovskite Solar Cells with Enhanced Operational Stability

Effects of ZnI2 Doping on the Performance of Methylammonium-Free Perovskite Solar Cells

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr<sub>2</sub>-Based Perovskite Solar Cells