Abstract:The poor interfacial contact and notorious instability issues between solid electrolyte and electrodes seriously handicap the practical applications of solid-state lithium metal batteries (LMBs). In-situ polymerization is a considerable choice to upgrade the interfacial transport properties by directly curing the liquid precursor inside the cell. Herein, a ∼ 17 μm poly(ethylene glycol) methyl ether methacrylate (PEGMEA) based solid polymer electrolyte (SPE) is prepared by this method. Trimethyl phosphate (TMP) and LiNO 3 are introduced to promote the ion transport as well as enhance the electrodes/electrolyte interfacial stability. Interestingly, although LiNO 3 increases the electrolyte's glass transition temperature thus hinders the anion transport, while higher Li + conductivity is obtained due to the weakened interaction between Li + and its ligands, ethylene oxide (EO) and TMP. The optimal electrolyte (PTLiN1) shows an acceptable ionic conductivity of 1.2 × 10 -4 S cm −1 at 55°C and lithium ion transference number ( tLi+ ) of 0.46, which enables the Li||Li symmetric cells to run stability within 1500 h (0.2 mA cm −2 , 0.4 mAh cm −2 ) at 55°C and 1000 h (0.1 mA cm −2 , 0.2 mAh cm −2 ) at 25°C. Meanwhile, the LiFePO 4 ||Li cell with PTLiN1 shows superior long cycle lifetime with a high capacity retention of 88.4% over 300 cycles at 0.5 C. The cells coupled with LiCoO 2 can even work stably under room temperature in the voltage range of 3.0 ∼ 4.3 V. Pouch cells based on PTLiN1 are also prepared and show outstanding flexibility and high security, which provides new idea for the development of economical and convenient solid-state batteries.

Flexible Ionic Conducting Elastomers for All-Solid-State Room-Temperature Lithium Batteries

Completely Amorphous Poly(ethylene oxide)-Based Electrolyte Enables High Ionic Conductivity for Room-Temperature All-Solid-State Lithium Metal Batteries

Room-Temperature Performance of Poly(Ethylene Ether Carbonate)-Based Solid Polymer Electrolytes for All-Solid-State Lithium Batteries

Novel PEO-based Solid Polymer Electrolyte with High Elasticity and High Ionic Conductivity for Room Temperature Lithium Metal Batteries

Photoexcitation‐Enhanced High‐Ionic Conductivity in Polymer Electrolytes for Flexible, All‐Solid‐State Lithium‐Metal Batteries Operating at Room Temperature

A Polymer-in-Salt Electrolyte Enables Room Temperature Lithium Metal Batteries

Flexible Asymmetric Organic-Inorganic Composite Solid-State Electrolyte Based on PI Membrane for Ambient Temperature Solid-State Lithium Metal Batteries

A new type of composite electrolyte with high performance for room-temperature solid-state lithium battery

Nanophase separated, grafted alternate copolymer styrene-maleic anhydride as an efficient room temperature solid state lithium ion conductor

A Stretchable and Safe Polymer Electrolyte with a Protecting-Layer Strategy for Solid-State Lithium Metal Batteries

Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance

Flexible Organic–Inorganic Composite Solid Electrolyte with Asymmetric Structure for Room Temperature Solid-State Li-Ion Batteries

Homogeneous and Fast Ion Conduction of PEO‐Based Solid‐State Electrolyte at Low Temperature

A thin composite polymer electrolyte with high room-temperature conductivity enables mass production for solid-state lithium-metal batteries

In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

Highly Adaptable Poly(ether-acrylate) Solid Electrolyte for Cathode/Electrolyte Interface Integration and Application in Lithium Metal-Free Solid-State Batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Optimisation of conductivity of PEO/PVDF-based solid polymer electrolytes in all-solid-state Li-ion batteries

LiNO 3 and TMP enabled high voltage room-temperature solid-state lithium metal battery