Abstract:Ni-rich layered cathode materials are considered as promising electrode materials for lithium ion batteries due to their high energy density and low cost. However, the low rate performance and poor electrochemical stability hinder the large-scale application of Ni-rich layered cathodes. In this work, both the rate performance and the structural stability of the Ni-rich layered cathode LiNi0.8Co0.1Mn0.1O2 are significantly improved via the dual-site doping of Nb on both lithium and transition-metal sites, as revealed by neutron diffraction results. The dual-site Nb-doped LiNi0.8Co0.1Mn0.1O2 delivers 202.8 mAh·g–1 with a capacity retention of 81% after 200 electrochemical cycles, which is much higher than that of pristine LiNi0.8Co0.1Mn0.1O2. Moreover, a discharge capacity of 176 mAh·g–1 at 10C rate illustrates its remarkable rate capability. Through in situ X-ray diffraction and electronic transport property measurements, it was demonstrated that the achievement of dual-site doping in the Ni-rich layered cathode can not only suppress the Li/Ni disordering and facilitate the lithium ion transport process but also stabilize the layered structure against local collapse and structural distortion. This work adopts a dual-site-doping approach to enhance the electrochemical performance and structural stability of Ni-rich cathode materials, which could be extended as a universal modification strategy to improve the electrochemical performance of other cathode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00755?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00755</a>.SEM, XPS, and EDS of the materials; structure diagram; XPS depth profile of Co 2p elements; charge/discharge curves of NCM-0% and NCM-1%; equivalent circuit used to fit the spectrum of EIS; Rietveld refinement results; and comparison of calculated electrochemical parameters deduced from EIS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00755/suppl_file/am1c00755_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancing the Electrochemical Performance of Ni-Rich Layered Oxide Cathodes by Combination of the Gradient Doping and Dual-Conductive Layers Coating

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Improving the Electrochemical Performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 Through a Cooperative Doping of Na+ and PO43− with Na3PO4

Dual functions of gradient phosphate polyanion doping on improving the electrochemical performance of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode at high cut-off voltage and high temperature

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Enhancing the Electrochemical Performance and Structural Stability of Ni-Rich Layered Cathode Materials via Dual-Site Doping

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

In-situ construction protective layer and phosphate doping synergistically improve the long-term cycle stability of LiNi0.6Co0.1Mn0.3O2

Optimized in Situ Doping Strategy Stabling Single-Crystal Ultrahigh-Nickel Layered Cathode Materials