Abstract:Here, a liquid crystal elastomer (LCE) with high thermal conductivity and low elastic modulus is used as a buried interlayer to obtain stress‐less perovskite films. The optimized thin films are utilized in both rigid and flexible perovskite solar cells, resulting in efficiencies of 24.5% and 22.8%, respectively. And they exhibit robust mechanical stability. Flexible perovskite solar cells (FPSCs) have gained considerable attention for potential applications in portable and wearable electronics. However, the design principles governing FPSCs remain incompletely understood. In this study, two critical factors—thermal conductivity and elastic modulus—that significantly influence the thermal and mechanical stabilities of FPSCs are identified. Achieving stress‐less conditions is crucial for enhancing the performance of FPSCs. To address this, a liquid crystal elastomer (LCE) is employed as a buffer interlayer to effectively mitigate residual thermal stress. This is achieved by improving the thermal conductivity of the electron transport layer from 0.76 to 1.07 W mK−1 and softening the perovskite layer, reducing the Young's modulus from 50 to 42 GPa. The optimized thin films are utilized in both rigid and flexible PSCs, resulting in efficiencies of 24.5% and 22.8%, respectively. Remarkably, these devices demonstrated excellent thermal stability, with unpackaged LCE rigid PSCs retaining 85.6% of their initial efficiency after 504 h of aging at 85 °C. Moreover, robust mechanical stability in FPSCs is exhibited, with 88.4% of the original efficiency retained after 5400 bending cycles. This investigation elucidates the profound impact of thermal conductivity and Young's modulus on the efficiency and stability of flexible electronics.

Highly Transparent, Thermally Stable, and Mechanically Robust Hybrid Cellulose-Nanofiber/Polymer Substrates for the Electrodes of Flexible Solar Cells

Printed Light-Trapping Nanorelief Cu Electrodes for Full-Solution-Processed Flexible Organic Solar Cells

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Ultrathin Flexible Transparent Composite Electrode via Semi-embedding Silver Nanowires in a Colorless Polyimide for High-Performance Ultraflexible Organic Solar Cells

Highly Flexible All‐Polymer Solar Cells Processed Without Post‐Treatment Achieving 13.56% Efficiency

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Fabricating efficient flexible organic photovoltaics using an eco-friendly cellulose nanofibers/silver nanowires conductive substrate

Complete Solution-Processed Semitransparent and Flexible Organic Solar Cells: A Success of Polyimide/Ag-Nanowires- and PH1000-Based Electrodes with Plasmonic Enhanced Light Absorption

High-Performance Bendable Organic Solar Cells with Silver Nanowire-Graphene Hybrid Electrode

Copper Nanowire-Tio2-polyacrylate Composite Electrodes with High Conductivity and Smoothness for Flexible Polymer Solar Cells

Highly Flexible Organo-Metal Halide Perovskite Solar Cells Based on Silver Nanowire-Polymer Hybrid Electrodes

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18% Efficiency Realized by Incorporating a Linker Dimerized Acceptor.

Thermoplastic elastomer enhanced interface adhesion and bending durability for flexible organic solar cells

Highly Flexible and Transparent Polylactic Acid Composite Electrode for Perovskite Solar Cells

Multifunctional flexible composite membrane based on nanocellulose-modified expanded graphite/electrostatically spun fiber network structure for solar thermal energy conversion

High-performance green electronic substrate employing flexible and transparent cellulose films

The Flexible and Transparent Film Heaters Based on Regenerated Cellulose and Carbon Nanotubes

Novel Ag‐Mesh Transparent Hybrid Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Solar Cells

Efficient and Stable Flexible Organic Solar Cells via the Enhanced Optical‐Thermal Radiative Transfer

Efficient and thermally stable all-polymer solar cells based on a fluorinated wide-bandgap polymer donor with high crystallinity

High Thermal Conductivity of Liquid Crystal Elastomer for Stress‐Less Flexible Perovskite Solar Cells