Abstract:Based on the neo-classical elastic energy of liquid crystal elastomers, the opto-mechanical behavior is modeled by considering the effect of photoisomerization on the nematic-isotropic transition of liquid crystal phase. Linearized stress–strain relation is derived for infinitesimal deformations with a very unusual shear stress that does not vanish identically as in the case of the soft behavior but is proportional to the rotation of directors. In other words, the shear stress depends on both the shear strain and the skew symmetric part of the displacement gradient with the shear modulus induced by the effect of photoisomerization. Finite element implementation for plane stress problems is obtained through a self-defined material subroutine in ABAQUS FEA tool. Numerical simulations show that the light induced deformations of two dimensional specimens consist of contractions, expansions and bending in different directions. The stress distributions indicate that the driving force for the light induced bending is produced by the bending moment of the normal stress along the director, while the other stress components are much smaller for two dimensional beam shaped specimens. However, the shear stress of the soft LCE is generally nonzero under light illumination due to the inhomogeneity of the opto-mechanical effect. It can be concluded from the strain distributions that the transversal plane cross section could remain plane after deformation if the light intensity or the decay distance is not too small and the sample is in the deep nematic phase. However, the shear strain and in plane rotation are of the same order as the other strain components, and thus should not be neglected. This indicates that the classical simple bending assumptions such as the Euler–Bernoulli beam theory should not be directly applied to model the light induced bending of neo-classical liquid crystal elastomers due to the soft behavior of the materials.

Mechanical Stress Birefringence of Optical Plates

Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials

FINITE ELEMENT ANALYSIS OF THE DEFORMATION AND STRESS IN THE OPTICAL ELEMENT UNDER COMPLEX OPERATION CONDITIONS

Optical-mechanical-thermal Analysis on Prism Assembly of Precision Light Beam Scanner

Finite Element Analysis on a Circular Wedge Prism with 400 Mm Diameter

Application of Orthogonal Test in Numerical Simulation of Glass Lens Molding

Finite element analysis on the assembly of circular wedge prism

Light Transmission in Thermal Stress-Induced Birefringent Medium

FEM Simulation and Analysis on Molding Process of Infrared Aspheric Lenses

Simultaneous Measurement of Stress-Optic Constant and Stress Field of Transparent Plate by Digital Holographic Interferometry

Prediction of birefringence for polymer optical products based on a novel molecular chain orientation model

Design and experimental verification of phase-reversal Fresnel lens for contact stress characterization

Investigation of Photoelastic Property and Stress Analysis for Optical Polyimide Membrane through Stress Birefringence Method

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Strain Transfer Relationship Between Optical Fiber Sensor and Structure Matrix

Photoelastic studies for composite dynamics

Measurement of stress-induced birefringence in glasses based on reflective laser feedback effect

Simulation of the Refractive Index Variation and Validation of the Form Deviation in Precisely Molded Chalcogenide Glass Lenses (IRG 26) Considering the Stress and Structure Relaxation

Analysis of the Stress-Optical Effects in Silica-on-silicon Optical Waveguides

Quasi-soft opto-mechanical behavior of photochromic liquid crystal elastomer: Linearized stress-strain relations and finite element simulations

Analytical Estimation of Stress-Induced Birefringence in Panda-Type Polarization-Maintaining Fibers