Abstract:Preparing high-performance concrete with full aeolian sand (FA-HPC) can address the shortage of high-quality aggregates. Its low water-binder ratio (w/b) and high content of cementitious material content endow this concrete with great strength and durability but a high risk of shrinkage cracking. Herein, the effect of superabsorbent polymer (SAP) on the separate shrinkage of FA-HPC, and the mechanism of internal curing (IC) were investigated from various macro–micro perspectives. IC water migration was monitored via nuclear magnetic resonance (1H NMR). The results showed that autogenous shrinkage dominated the total shrinkage of the FA-HPC, accounting for 70%–80%. The SAP with medium particles effectively reduced the total shrinkage in the plastic and hardening stages, with nearly zero autogenous shrinkage at 0.3% content. From the characterization of mechanism, capillary pressure build-up of FA-HPC containing SAP was delayed with significant suppression in internal relative humidity (IRH) drop and moisture loss especially due to self-desiccation. The coupling effect of self-desiccation and evaporation triggered the nonlinear correlation between moisture loss and total shrinkage, whereas SAP amplified the proportion of drying shrinkage. Microscopically, the incorporation of SAP with IC water hindered the early hydration process but resulted in a higher final hydration degree within 72 h bringing a refined pore structure. Moreover, the adaptive release of IC water was used for hydration mainly within 72 h, and it continuously compensated for IRH drop over 28 d based on the supply–demand mechanism in FA-HPC. This study proposes a promising strategy for shrinkage resistance of FA-HPC and promotes the application of aeolian sand-based concrete.

RETRACTED: Experimental Method and Prediction Model for Autogenous Shrinkage of High Performance Concrete

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

A Prediction Model for Autogenous Shrinkage of High-Performance Concrete in Bridge Engineering

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Early-age Autogenous Shrinkage and Stress Characteristics of High-Performance Concrete at the Mesoscopic Level

Autogenous shrinkage prediction models and microstructure of UHPC with single or binary addition of an expansive agent and steel fibers

Experimental study and prediction model for autogenous shrinkage of recycled aggregate concrete with recycled coarse aggregate

Prediction of the autogenous shrinkage and microcracking of alkali-activated slag and fly ash concrete

Unified shrinkage model for concrete from autogenous shrinkage test on paste with and without ground-granulated blast-furnace slag

Selection of Prediction Model for the Shrinkage of High Performance Concrete

Shrinkage design model of concrete incorporating wet packing density

Autogenous Shrinkage Measuring of Concrete and Model Analysis

Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers

Numerical study of the autogenous shrinkage of cement pastes with supplementary cementitious materials based on solidification theory

Experimental and Theoretical Studies on Autogenous Shrinkage of Concrete at Early Ages

Shrinkage of high-performance fiber-reinforced concrete with adapted rheology

Experimental and numerical study on the mitigation of autogenous shrinkage of cementitious material

Drying shrinkage model for recycled aggregate concrete accounting for the influence of parent concrete

Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures

Autogenous shrinkage of alkali-activated slag: A critical review

Evolution and mechanism on shrinkage of high-performance concrete with full aeolian sand cured by superabsorbent polymer