Abstract:Moisture damage is a main factor degrading the bonding performance between asphalt binder and aggregate, playing adverse effects on the integrity of pavements, and thus reducing their serviceability substantially. The asphalt pavement is susceptible to moisture damage, exhibiting weakened durability and accelerated distress in many other formations with lower service life. In this study, moisture damage was reflected in the immersion method of Marshall test, and the deterioration potential of moisture damage on the fracture behaviors of asphalt mixture was investigated through multi-scale analysis. Pull-off tests were carried out to characterize the bonding performance between asphalt binder and aggregate considering the influence of moisture erosion, and the adhesion and cohesion results were adopted as the key mechanical parameters for the subsequent numerical analysis. Semi-circular bending (SCB) tests were conducted for the specimens with or without water immersion conditioning, and the fracture parameters, including the critical strain energy release rate (J-integral), Flexibility Index (FI), Crack Resistance Index (CRI), and Balanced Cracking Index (BCI), were obtained to provide insights into the fracture performance of the asphalt mixture. Furthermore, the mechanism of moisture affecting the fracture behavior of asphalt mixtures in meso-scale was explored through numerical analysis based on finite element modeling (FEM). A virtual SCB specimen integrated with two cohesive zone models (CZM) describing the failure of asphalt mortar and the loss of adhesion between asphalt binder and aggregate was established. The results from pull-off tests indicated that water immersion could enlarge the adhesive failure area and subsequently decrease the bonding strength between binder and aggregate. However, moisture damage had a limited effect on cohesive failure performance. Results from SCB tests showed that immersion could significantly increase the moisture damage potential and the crack development speed, weaken the fracture resistance, and reduce the flexibility of the asphalt mixture. The numerical analysis method proposed in the study was effective to interpret the effect of moisture damage on the fracture behaviors of the asphalt mixture. It was found that moisture damage led to more pronounced internal damage, and more failures at the interface of binder-aggregate were observed due to the deterioration effect of moisture erosion on the adhesion. According to the fracture development under dry and wet conditioning, the asphalt mixture would crack earlier after encountering moisture damage. The research method combining laboratory tests and numerical simulations demonstrated more comprehensively the impact of moisture damage on the fracture performance of asphalt mixture from a macro to meso perspective.

Analysis of cohesive and adhesive damage initiations of asphalt pavement using a microstructure-based finite element model

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Review of Mechanistic-Empirical Modeling of Top-Down Cracking in Asphalt Pavements

Characteristics of Damaged Asphalt Mixtures in Tension and Compression

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Energy-based Mechanistic Approach for Damage Characterization of Pre-Flawed Visco-Elasto-plastic Materials

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Enhanced Model for Thermally Induced Transverse Cracking of Asphalt Pavements

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Energy-based Crack Initiation Model for Load-Related Top-Down Cracking in Asphalt Pavement

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Digital Imaging Technology-Assisted Water-Sensitivity Assessment of Asphalt Mixtures: A Comprehensive Review

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

Multi-scale Analysis on Fracture Behaviors of Asphalt Mixture Considering Moisture Damage

Evaluation of asphalt mixture micromechanical behavior evolution in the failure process based on discrete element method

Application of Digital Image Processing Technique to Simulate the Macro-Mechanical Behavior of Asphalt Concrete

Research on the Damage Mechanics Model of Asphalt Pavement Based on Asphalt Pavement Potential Damage Index

Preliminary Study on Multi-Scale Modeling of Asphalt Materials: Evaluation of Material Behavior through an RVE-Based Approach

Influence of Interaction between Microcracks and Macrocracks on Crack Propagation of Asphalt Concrete