Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

Mesoscale Numerical Simulation of Fracture of Cement Treated Base Material During Semi Circular Bending Test with Discrete Element Model

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Meso-scale Cracking Behavior of Cement Treated Base Material

Influence of Mesoscale Heterogeneous and Initial Defects on the Fracture of Cement-Treated Base Materials

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Fatigue Damage Numerical Simulation of Cement-Treated Base Materials by Discrete Element Method

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Cement Mortar

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Discrete-Element Modeling of Cemented Granular Material Using Mixed-Mode Cohesive Zone Model

Numerical Simulation of Mesoscopic Cracking of Cement-Treated Base Material Based on Random Polygon Aggregate Model

Micromechanical Behavior of Cement-Treated Base Materials Incorporating Recycled Crushed Aggregates Arising from C&D Waste Powder Based on DEM

3D Mesoscale Study on the Effect of ITZ and Aggregate Properties on the Fracture Behaviors of Concrete Based on Discrete Element Method

Numerical Simulation of Mesoscopic Tensile Fracture Process of Concrete Using the Cohesive Elements

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Numerical Study of the Semi-Circular Bend Dynamic Fracture Toughness Test Using Discrete Element Models

Mesoscopic discrete modeling of compression and fracture behavior of concrete: Effects of aggregate size distribution and interface transition zone

Micromechanical Modeling of Cement-Treated Base Materials Considering Recycled Crushed Aggregate Morphology from Construction and Demolition Waste Using Three-Dimensional Discrete Element Method