Abstract:A random aggregate (RA) model consisting of mortar, aggregate, and the interfacial transition zone (ITZ) was established to investigate the effect of existing cracks on the tensile properties of concrete. Based on this, a method for establishing a geometric model of cracked concrete was proposed by inserting 0-depth cohesive elements into the RA model. The influence of crack length, width, and area on the tensile properties of concrete were studied using the established cracked concrete model. In addition, the key parameters of bond strength and fracture energy of the mortar and ITZ regions were tested. The cement is ordinary Portland cement with a strength grade of 42.5, and the sand is medium sand. The fracture energy tests were conducted using a displacement-controlled loading model with a loading rate of 0.4 mm/min, while the tensile strength tests were conducted using a stress-controlled loading method with a loading rate of 0.06 MPa/s. The feasibility and accuracy of the numerical method used were verified by comparing the results with those of a finite compression simulation. The numerical results show that as the crack length increases, the tensile strength and elastic modulus of concrete gradually decrease, but if the crack length is 0.47 h, the elastic modulus of concrete shows an abnormal increase. The range of the crack's influence on the tensile performance of concrete is between 50 mm and 100 mm. If the crack width is less than 0.55 mm, the tensile strength of concrete gradually decreases with the increase of crack width, and when the crack width is greater than 0.55 mm, the tensile strength stabilizes.

An atomistic based continuum level 3D mode-I meso-fracture criterion for cement-based concrete

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Determination of Intergranular and Transgranular Failure of Mesoscale Model Concrete under Mode-I Fracture

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Theoretical characterization of mesoscopic dynamic fracture behaviors of concrete based on an extended self-consistent finite stress model (XSFSM)

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

3D meso-scale fracture modelling of concrete with random aggregates using a phase-field regularized cohesive zone model

A Mesoscopic Approach for the Size Effect on Fracture Energy of Concrete

A Multiphase Mesostructure Mechanics Approach to the Study of the Fracture-Damage Behavior of Concrete

Simulation of Meso-Fracture for Concrete Based on the Developed Random Aggregate Model

3D Meso-Scale Fracture Modelling and Validation of Concrete Based on in Situ X-ray CT Images and Cohesive Crack Model

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model