Abstract:Grouting is a common method to improve the mechanical properties of the fractured rock mass. Understanding the effect of grouting on the mechanical properties of fractured rock mass is considered essential for the establishment of efficient grouting designs and the development of new grouting materials. Therefore, in this research, a series of experiments are conducted to reveal the influence of grouting material on the mesostructure and macroscopic mechanical behavior of the grout-rock interface. Firstly, grouted samples with different grouting materials (ordinary Portland cement (OPC), microfine cement (MFC), and epoxy resin (EPR)) were prepared. Then, nuclear magnetic resonance (NMR) and X-ray computed tomography (CT) were carried out on the grouted rock mass to investigate the pore phase composition and mesostructure. Subsequently, correlating acoustic emission (AE) counts and shear stress-displacement curves reveal the shear failure process of the grouted rock mass. Finally, the failure mechanism of grouted rock mass was discussed in detail. The results displayed that the damage characteristic during shear failure of the grouted rock mass may be inferred from the AE counts. The shear strength of the sample grouted with OPC, MFC, and EPR is 8.3%, 41.5%, and 142.8% of that of intact rock, respectively. EPR reduces the pore content at the grout-rock interface compared with cement-based grout, especially the macropores and the micropores. Compared with the rock layer, the number of pores at the grout-rock interface of the sample grouted with OPC, MFC, and EPR is reduced by 43.3%, 57.1%, and 64.3%, respectively. The hydrophilicity of the rock leads to a discrepancy in the hydration degree of cement-based grout, which causes uneven shrinkage of the grout and produces cracks. However, as a chemical grouting material, EPR may permeate into the rock interior and modify the mesostructure of the grout-rock interface. The grout-rock bonding and mesostructure of the grout-rock interface dominate the failure mechanism, thus determining the macroscale mechanical properties of the grouted rock mass.

An Experimental Study on the Cutting Failure of Polymer Grouting

Propagation Analysis of Polymer Grout in Vertical Fractures: An Experimental and Numerical Study

Numerical Investigation of Grout Diffusion Accounting for the Dynamic Pressure Boundary Condition and Spatiotemporal Variation in Slurry Viscosity

Study on the Diffusion Characteristics of Polymer Grouting Materials Applied for Crack Filling in Underground Mines Based on Numerical Simulation and Experimental Methods

Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface

Study on Ratio Optimization and Diffusion-Gelation Process of Polymer Grouting Materials for Fracture Filling in Underground Mines

Numerical Manifold Simulation and Medium-Parameter Analysis of the Polymer Grouting Process in Three-Dimensional Rock Fractures

Study on the Gelation Process and Mechanical Properties of Organic Polymer Grouting Materials Applied to Fissure Sealing in Underground Mines

Mechanical evaluation analysis of pipe-liner composite structure before and after polymer grouting rehabilitation

Study on Propagation Characteristics of Ground Penetrating Radar Wave in Dikes and Dams with Polymer Grouting Repair Using Finite-Difference Time-Domain with Perfectly Matched Layer Boundary Condition

Study on Parameter Optimization and Mechanism of Rigid-Flexible Coupling Underground Engineering Structure of Steel Panel and Polymer

Application of polymer split grouting technology in earthen dam: Diffusion law and applicability

Study on Grouting Performance Optimization of Polymer Composite Materials Applied to Water Plugging and Reinforcement in Mines

Innovative Ground Improvement with Chemical Grouts: Potential and Limits of Partial Saturation with Polymers

Large-scale model testing of high-pressure grouting reinforcement for bedding slope with rapid-setting polyurethane

Experimental investigation on the failure mechanism of grouted rock mass: Mesostructure and macroscopic mechanical behavior

Experimental Study on the Diffusion Characteristics of Nonaqueous Reactive Expansive Polymers in Sand and Gravel Media under Dynamic Water Conditions

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

Intelligent prediction model of a polymer fracture grouting effect based on a genetic algorithm-optimized back propagation neural network

Microstructure and Fatigue Performance of Polyurethane Grout Materials under Compression

In-situ direct shear test and numerical comparative research on mudstone gravel slope reinforced by polymer grouting