Abstract:With the long-term water-flooding development of the reservoir, the non-homogeneity of the formation is increasing and the reservoir environment is deteriorating; the microspheres used for deep plugging have shown disadvantages, such as poor temperature and salt resistance and faster expansion. In this study, a polymeric microsphere was synthesized that is resistant to high temperature and high salt and can achieve slow expansion and slow release for deep migration. P(AA-AM-SA)@TiO2 polymer gel/inorganic nanoparticle microspheres were prepared by reversed-phase microemulsion polymerization using acrylamide (AM) and acrylic acid (AA) as monomers, 3-methacryloxypropyltrimethoxysilane (KH-570)-modified TiO2 as the inorganic core, and sodium alginate (SA) as a temperature-sensitive coating material. Through single-factor analysis of the polymerization process, the optimal synthesis conditions were determined as follows: the oil(Cyclohexane)-water volume ratio was 8:5, the emulsifier mass ratio (Span-80:Tween-80) was 3:1 (10 wt% of the total system amount), the stirring speed was 400 r/min, the reaction temperature was 60 °C, and the initiator (ammonium persulfate and sodium bisulfite) dosage was 0.6 wt%. The size of the dried polymer gel/inorganic nanoparticle microspheres prepared by the optimized synthesis conditions was 10~40 μm with uniform particle size. The observation of P(AA-AM-SA)@TiO2 microspheres reveals that the Ca elements are uniformly distributed on the microspheres, and FT-IR indicates that the synthesized product is the target product. TGA shows that the polymer gel/inorganic nanoparticle microspheres have better thermal stability after the addition of TiO2, with a larger mass loss at 390 °C, which can adapt to the medium-high permeability reservoir environment. The thermal and aqueous salinity resistance of the P(AA-AM-SA)@TiO2 microspheres was tested, and the cracking temperature of P(AA-AM-SA)@TiO2 microsphere temperature-sensitive material was 90 °C. It still has favorable water absorption and swelling performance under the sodium salt concentration of 2.5 × 104 mg/L and can tolerate calcium salt up to 2.0 × 104 mg/L. Plugging Performance Test results show that the microspheres have good injectability between the permeability of 1.23 and 2.35 μm2 and good plugging effect near the permeability of 2.20 μm2. At high temperature and high salinity, P(AA-AM-SA)@TiO2 microspheres have a remarkable effect on profile control and water shutoff, the plugging rate reaches 95.3%, and the oil recovery rate is increased by 12.89% compared with water flooding, achieving the effect of slow swelling and slow release.

The Synthesis and Water-Swelling Performances of Magnetic Composite Microspheres with Multi-Shell Structures Via a Combination Method

Smart Nanoparticles for Conformance Improvement in Waterflooding

Monodispers and Multifunctional Magnetic Composite Core Shell Microspheres for Demulsification Applications

The preparation and displacement performances of a hollow structure microsphere with swelling–deswelling properties for enhanced oil recovery (EOR)

Fabrication of Novel Multihollow Superparamagnetic Magnetite/Polystyrene Nanocomposite Microspheres Via Water-In-Oil-In-Water Double Emulsions

Synthesis and Characterization of Poly(am-Sss-amps)/ O-MMT Nanocomposite Microspheres with Tailored Nanomechanical Properties

Advanced magnetic nanospheres for oil pollutant management: Dual roles in emulsification and demulsification

Preparation and Performance Evaluation of Self-Cementing Nanoscale Polymeric Microspheres with Salt and Temperature Tolerance

Multi-Functional Thermosensitive Composite Microspheres with High Magnetic Susceptibility Based on Magnetite Colloidal Nanoparticle Clusters

Toward Designer Magnetite/polystyrene Colloidal Composite Microspheres with Controllable Nanostructures and Desirable Surface Functionalities.

Stimuli-responsive composite particles as solid-stabilizers for effective oil harvesting.

Synthesis, Characterization, and Application of Composite Alginate Microspheres with Magnetic and Fluorescent Functionalities

Research on the Effect of Different Surfactants on Fluidity of Water-Based Magnetic Fluid

Experimental Study on Injection and Plugging Effect of Core–Shell Polymer Microspheres: Take Bohai Oil Reservoir as an Example

Characterization and Application of Magnetic P (St-Co-maa-co-am)/sio 2 Composite Microspheres

Synthesis and Performance Evaluation of Alginate-Coated Temperature-Sensitive Polymer Gel Microspheres

Synthesis of Functional Magnetic Porous SrFe12O19/P(St-DVB-MAA) Microspheres by a Novel Suspension Polymerization

Hybrid-dimensional magnetic microstructure based 3D substrates for remote controllable and ultrafast water remediation

Synthesis of Cross-Linked Magnetic Composite Microspheres Containing Carboxyl Groups

Preparation and Characterization of Multiresponsive Polymer Composite Microspheres with Core–shell Structure

Hydrophilic Dual‐responsive Magnetite/pmaa Core/shell Microspheres with High Magnetic Susceptibility and Ph Sensitivity Via Distillation‐precipitation Polymerization