Abstract:Siliceous mesostructured cellular foams (MCF) impregnated with polyethylenimine (PEI) of various molecular weights and structures were evaluated as CO2 adsorbents. The MCF solid support consisted of a well-defined interconnected three-dimensional mesoporous structure with large cell diameter of 30.3 nm and large window diameter of 11.3 nm, filled with polyethylenimine up to 70 weight percent or about 22.3% nitrogen atom by weight of the adsorbents. While other mesoporous solid supports lost their porosity after PEI impregnation, our MCF solid support maintained its pore volume over the range of 1.12 to 1.64 cm(3) g(-1). The importance of the porosity of PEI-impregnated MCF adsorbents for high capacity CO2 adsorbents was demonstrated. The highest CO2 sorption capacity (180.6 mg-CO2/g-adsorbent or 393.6 mg-CO2/g-PEI at 75 degrees C) was obtained for silica supports loaded with 50 weight percent branched PEI with average molecular weight of 600 g mol(-1). Under dry atmospheric CO2 gas, this adsorbent reached the theoretical CO2 capacity of 0.50 mole-CO2 per mole-nitrogen within less than about 8 min, making this adsorbent one of the most effective CO2 adsorbents reported. Repeated multiple sorption cycles demonstrated good stability of this adsorbent for CO2 capture. The initial sorption kinetics determined the overall CO2 sorption capacity, which was limited by the formation of a carbamate layer as a result of the CO2-PEI complexation that due to inhibition of CO2 diffusion; the kinetics of "ionic" gelation of the impregnated PEI by CO2 controlled the overall performance of the CO2 adsorbents. At 75 degrees C, the operating temperature favored the molecular mobility of PEI and unrestricted diffusion of CO2 to allow the theoretical CO2 capacity of the PEI to be attained. Lower temperatures limited the mobilities of PEI and CO2 and the kinetics of "ionic" gel formation dominated, causing a lowered overall performance of the CO2 adsorbents. Overall, this study points to the importance of interconnected porous channel networks to optimize the performance of PEI-impregnated mesoporous silica particles.

Effect of Comonomer on the Cu-BDC/Poly(NMA-coSAS) Foams Templating from CO2-in-water Emulsion: Adsorptive and Bacteriostatic Applications

Interconnected Porous Monolith Prepared Via UiO-66 Stabilized Pickering High Internal Phase Emulsion Template

Multiporous Microstructure for Enhancing the Water Absorption and Swelling Rate in Poly(sodium Acrylic Acid) Superabsorbent Hydrogels Based on a Novel Physical and Chemical Composite Foaming System

Synthesis of mesoporous silica hollow spheres in supercritical CO2/water systems

Preparation of Bio-Based Foams with a Uniform Pore Structure by Nanocellulose/Nisin/Waterborne-Polyurethane-Stabilized Pickering Emulsion

Toward Maximizing the Mechanical Property of Interconnected Macroporous Polystyrenes Made from High Internal Phase Emulsions.

Mussel-Inspired Polydopamine Coated Hollow Carbon Microspheres, a Novel Versatile Filler for Fabrication of High Performance Syntactic Foams

A Simple and Environment-Friendly Approach for Synthesizing Macroporous Polymers from Aqueous Foams

Tailored boron phosphate monolithic foam with multimodal hierarchically porous structure and its applications

Synthesis and Coating of Ordered Mesoporous Silica

Interfacial properties and foam performance of alpha olefin sulfonate and CO2 switchable aminopropyl methyl siloxane surfactant mixtures

Synthesis of CO2-philic/hydrophilic surfactant with brush structure and its application in preparing monolithic materials

Polyethylenimine-Impregnated Siliceous Mesocellular Foam Particles As High Capacity Co2 Adsorbents

Evaporation‐Induced Coating and Self‐Assembly of Ordered Mesoporous Carbon‐Silica Composite Monoliths with Macroporous Architecture on Polyurethane Foams

Adsorption characteristics of amphiphilic open-cell poly(butylene succinate) foams with ultrahigh porosity

A Convenient and Versatile Strategy for the Functionalization of Silica Foams Using High Internal Phase Emulsion Templates As Microreactors.

Stable Aqueous Foams from Cellulose Nanocrystals and Methyl Cellulose

Copper-based metal organic framework/polymer foams with long-lasting antibacterial effect

Preparation of Carboxymethyl Cellulose-Based Macroporous Adsorbent by Eco-Friendly Pickering-MIPEs Template for Fast Removal of Pb2+ and Cd2+

Effect of Surface Tension, Foaming Stabilizer, and Graphene Oxide on the Properties of Foamed Paste

Synthesis of Large-Pore Mesostructured Cellular Foam Silica Spheres for the Adsorption of Biomolecules