Abstract:2D transition metal carbide materials called MXene have attracted significant interest in the field of electrochemical energy storage due to their high electrical conductivity and high volumetric capacity. However, the low capacity accompanied by sluggish sodiation kinetics of electrodes made from multi-layer MXene has limited their further application for sodium ion storage. The key challenge to overcome the abovementioned issue is to decrease the Na+ diffusion barrier and increase the active site concentration in MXene electrodes used for Na+ storage. In this study, a method to significantly improve the capacity and kinetics of Ti3C2 MXene for Na+ storage using facile alkali metal ion pillaring is reported. After Na+ pillaring, the MXene sheets (Na–Ti3C2) with incremental interlayer spacing exhibit a high reversible capacity of 175 mA h g−1 (∼170% of the original value) at 0.1 A g−1 and an excellent outstanding cycling stability for 2000 cycles at 2.0 A g−1 for sodium ion storage. By combining ex situ XPS with kinetics analysis, the increased number of active sites and lower Na+ diffusion barrier were confirmed after Na+ pillaring when compared with the cases of Ti3C2, Li–Ti3C2, and K–Ti3C2. The role of the terminal groups (–OH) in Na–Ti3C2 has also been confirmed by analysis of the electrochemical performance of the annealed Na–Ti3C2 samples (450 °C and 700 °C). The results show that the existence of –OH groups in Na–Ti3C2 can increase the number of Na+ storage active sites, but decrease the kinetics. By coupling the Na–Ti3C2 anode with an AC cathode, the assembled SIC device delivers a high energy density of 80.2 W h kg−1 and high power density (6172 W kg−1) with an ultra-long and stable cycling performance (capacity retention: ∼78.4 at 2 A g−1 after 15 000 cycles).

A Novel Strategy of in Situ Trimerization of Cyano Groups Between the Ti 3 C 2 T X (mxene) Interlayers for High-Energy and High-Power Sodium-Ion Capacitors

3D Grape String-Like Heterostructures Enable High-Efficiency Sodium Ion Capture in Ti3C2Tx MXene/fungi-derived Carbon Nanoribbon Hybrids.

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Tunable Pseudocapacitance Storage of MXene by Cation Pillaring for High Performance Sodium-Ion Capacitors

Atomic Sulfur Covalently Engineered Interlayers of Ti3C2 MXene for Ultra‐Fast Sodium‐Ion Storage by Enhanced Pseudocapacitance

Enhancing ion storage and transport in Ti<sub>3</sub>C<sub>2</sub>T<sub><i>z</i></sub> MXene <i>via</i> a "sacrificial cations" strategy

Highly stable Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene-based sandwich-like structure via interfacial self-assembly of nitrogen-rich polymer network for superior sodium-ion storage performance

Rational Design of Three-Dimensional Interlaced Frameworks with 2D MXene-Ti3C2Tx and 2D ZnCo Bimetallic Hydroxide for Enhanced Sodium-Ion Capacitors

Energy storage mechanism of MXene-Based sodium/potassium titanate for high performance elecrtrode

In situ formation of NaTi2(PO4)3 cubes on Ti3C2 MXene for dual-mode sodium storage

Energy storage mechanism of MXene-Based sodium/potassium titanate for high performance electrode

Concentrated Laminate Structure in Dense MXene Monoliths Promises High‐Capacity Sodium Storage

Highly Sable Ti3c2tx Mxene-Based Sandwich-Like Structure Via Interfacial Self-Assembly of Nitrogen-Rich Polymer Network for Superior Sodium-Ion Storage Performance

A Novel Strategy for High Energy Density Supercapacitors: Formation of Cyanuric Acid Between Ti3C2Tx (mxene) Interlayer Hybrid Electrodes

Synthesis of Nitrogen-Sulfur Co-Doped Ti3C2Tx MXene with Enhanced Electrochemical Properties

Pre-Sodiated Ti3C2Tx MXene Structure and Behavior As Electrode for Sodium-Ion Capacitors

3D Carbon-Coated MXene Architectures with High and Ultrafast Lithium/sodium-Ion Storage

MXene Derived TiS2 Nanosheets for High-Rate and Long-Life Sodium-Ion Capacitors

Surfactant-free self-assembled MXene/carbon nanotubes hybrids for high-rate sodium- and potassium-ion storage

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

Synthesis of new two-dimensional titanium carbonitride Ti<sub>2</sub>C<sub>0</sub><sub>.</sub><sub>5</sub>N<sub>0</sub><sub>.5< /sub>T<sub><i>x</i></sub> MXene and its performance as an electrode material for sodium-ion battery