Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Optimization of Mechanical and Tribological Properties of Carbon Fabric/resin Composites Via Controlling ZnO Nanorods Morphology

Interfacial modification and tribological properties of ZnO nanosheet carbon fiber reinforced poly(hexahydrotriazine) composites

Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites

Growth of ZnO nanorods/flowers on the carbon fiber surfaces using sodium alginate as medium to enhance the mechanical properties of composites

In-situ Pull-off of ZnO Nanowire from Carbon Fiber and Improvement of Interlaminar Toughness of Hierarchical ZnO Nanowire/carbon Fiber Hydrid Composite Laminates

Improvement of Bond Strength Between ZnO Nanorods and Carbon Fibers Using Magnetron Sputtered ZnO Films As the Interphase

Friction Process Analysis of Carbon Fiber-Carbon Nanotube Multiscale Hybrid Reinforced Epoxy with Excellent Tribological Performance

Tribological properties of differently shaped zinc‐based metal‐organic framework particles reinforced epoxy resin composites

Interface construction of micro/nano hierarchical structure to enhance the tribological performance of carbon fabric/phenolic composite

Tribological Properties of Carbon Fabric Reinforced Phenolic-Based Composites Containing CNTs@MoS2 Hybrids

Synergism of Hollow MoS2 Nano-Particles and WS2 Micro-Particles on Improving the Tribological Properties of Carbon Fiber Fabric Reinforced Phenolic-Based Composites

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Preparation of Small CNTs@Fe3O4 and Alignment in Carbon Fabrics/epoxy Composites to Improve Mechanical and Tribological Properties

Adopting bio-inspired interfacial modification and reinforcements simultaneously for optimizing the tribological performance of fabric composites

Improved Tribological Performance of Amorphous Carbon (a-C) Coating by ZrO2 Nanoparticles

Tribological and mechanical characteristics of glass/flax fiber-ZnO reinforced epoxy hybrid composite

Tribological Behavior of the Carbon Fiber-Reinforced Epoxy Resin Matrix Composite with Orderly Arranged Carbon Nanotubes

Tribological Properties of Carbon Nanotube-Reinforced Composites

The enhanced tribological performance of fabric‐reinforced resin composites by biomimetic surface modification of fillers

Preparation of Boron Nitride Grafted Carbon Nanotubes for Enhancing the Tribological Performance of Poly (ether Ether Ketone) Composite

Mechanisms of simultaneously enhanced mechanical and tribological properties of carbon fabrics/phenolic resin composites reinforced with graphite nanoplatelets