Abstract:Advanced hierarchical carbon fiber epoxy laminates with an engineered interface using in situ-grown ZnO nanorods on carbon fiber resulted in strong mechanical interlocking with the matrix. To further strengthen the interface, "site-specific" modification was realized by modifying the ZnO nanorods with bismaleimide (BMI), which facilitates "thermo-reversible" bonds with graphene oxide (GO) present in the matrix. The resulting laminates exhibited an improvement in flexural strength by 20% and in interlaminar shear strength (ILSS) by 28%. In order to gain a mechanistic insight, few laminates were prepared by "nonselectively" modifying the ZnO-grown carbon fiber (CF) with BMI. The "nonselectively" modified laminates showed flexural strength and ILSS improvement by 43 and 39%, respectively. The "nonselective" modification resulted in a strong improvement in mechanical properties; however, the "site-specific" modification yielded a higher self-healing efficiency (81%). Raman spectroscopy, scanning electron microscopy (SEM) micrographs, atomic force microscope (AFM) analysis, and contact angle analysis indicated a strong interaction of the modified CFs with the resin. Enhanced surface area and energy, along with a decrease in segmental molecular mobility observed from dynamic mechanical analysis, confirmed the mechanism for a better performance. Microscopic images revealed an improved interfacial behavior of the fractured samples, indicating a higher interfacial adhesion in the modified laminates. Besides mechanical properties, these laminates also showed excellent electromagnetic interference (EMI) shielding performance. The laminates with only ZnO-modified CF showed a high shielding effectiveness of -47 dB.

Improvement of Bond Strength Between ZnO Nanorods and Carbon Fibers Using Magnetron Sputtered ZnO Films As the Interphase

Growth of ZnO nanorods/flowers on the carbon fiber surfaces using sodium alginate as medium to enhance the mechanical properties of composites

In-situ Pull-off of ZnO Nanowire from Carbon Fiber and Improvement of Interlaminar Toughness of Hierarchical ZnO Nanowire/carbon Fiber Hydrid Composite Laminates

Interfacial modification and tribological properties of ZnO nanosheet carbon fiber reinforced poly(hexahydrotriazine) composites

Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites

Effect of Nanoscale Surface Modification on the Interfacial Mechanics of Carbon Fibers

Nondestructive growing nano-ZnO on aramid fibers to improve UV resistance and enhance interfacial strength in composites

Nondestructive Grafting of ZnO on the Surface of Aramid Fibers Followed by Silane Grafting to Improve Its Interfacial Adhesion Property with Rubber

Enhancing the wettability and interface bonding in carbon nanotubes reinforced 2A70 alloy by the coating of ZrO2

Bending Anchoring Reinforcement of Zinc Nano Sheets for Carbon Fiber Composites

Interfacial adhesion between carbon fibers and nylon 6: Effect of fiber surface chemistry and grafting of nano-SiO2

A Controllable Interface Performance Through Varying Zno Nanowires Dimensions on the Carbon Fibers

Enhanced Mechanical and Self-Healing Properties of Carbon Fiber-Reinforced Epoxy Laminates Using In Situ-Grown ZnO Nanorods and Thermo-Reversible Bonds

In-situ self-assembled block copolymer nanowires on high-modulus carbon fibers surface for enhanced interfacial performance of CFRPs

Interfacial Interaction between Zn2+ and Surface Functional Groups Impacting Self-Assembly of ZnO on Cellulose Nanofibrils

Solving the Bonding Problem of the Ni Thin Coating with the Ultrasonic Assisted Electrochemical Potential Activation Method

Hexagonal Crystalline Nanofillers Reinforced Composite Carbon Nanofibers with Optimized Crystal Structure and Improved Mechanical Properties

Interfacial Microstructure and Bond Strength of Nano-Sio2-coated Steel Fibers in Cement Matrix

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Preparation and characterization of bat-like ZnO micro- and nanorods by adjusting oxygen flux

Fabrication and Characterization of Ni–Zr Composite Coatings Using Electrodepositing Technique