Abstract:This study details the synthesis of optimized‐Ti3AlC2 MAX via pressureless sintering in inert environment, followed by pre‐etch hydrochloric acid washing, which removes intermetallic impurities. The pre‐washed MAX is subjected to selective etching using a mixture of hydrofluoric and hydrochloric acids. The resulting multilayered Ti3C2Tx MXene is then delaminated using lithium chloride to yield single‐ to few‐layered Ti3C2Tx MXene flakes. To advance the MXene field, it is crucial to optimize each step of the synthesis process and create a detailed, systematic guide for synthesizing high‐quality MXene that can be consistently reproduced. In this study, a detailed guide is provided for an optimized synthesis of titanium carbide (Ti3C2Tx) MXene using a mixture of hydrofluoric and hydrochloric acids for the selective etching of the stoichimetric‐Ti3AlC2 MAX phase and delamination of the etched multilayered Ti3C2Tx MXene using lithium chloride at 65 °C for 1 h with argon bubbling. The effect of different synthesis variables is investigated, including the stoichiometry of the mixed powders to synthesize Ti3AlC2, pre‐etch impurity removal conditions, selective etching, storage, and drying of MXene multilayer powder, and the subsequent delamination conditions. The synthesis yield and the MXene film electrical conductivity are used as the two parameters to evaluate the MXene quality. Also the MXenes are characterized with scanning electron microscopy, x‐ray diffraction, atomic force microscopy, and ellipsometry. The Ti3C2Tx film made via the optimized method shows electrical conductivity as high as ≈21,000 S/cm with a synthesis yield of up to 38 %. A detailed protocol is also provided for the Ti3C2Tx MXene synthesis as the supporting information for this study.

Ionic Liquid-Based Synthesis of MXene

Synthesis of MAX Phase Nanofibers and Nanoflakes and the Resulting MXenes

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene

Solvent-Free One-Step Green Synthesis of Mxenes by “Gas-Phase Selective Etching”

Step‐by‐Step Guide for Synthesis and Delamination of Ti3C2Tx MXene

Molten salt-shielded solid-state synthesis (MS5) reaction-driven >99% pure Ti3AlC2 MAX phase: effect of MAX phase purity on the interlayer separation of MXenes and Na-ion storage

Comprehensive synthesis of Ti 3 C 2 T x from MAX phase to MXene

Pristine MXene: In Situ XRD Study of MAX Phase Etching with HCl+LiF Solution

Synthesis of Three Families of Titanium Carbonitride MXenes

Computationally Guided Synthesis of MXenes by Dry Selective Extraction

MXeneNanosheets and Membranes

Fluoride‐Free Synthesis of Two‐Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System

Thermal reduction of sulfur-containing MAX phase for MXene production

Chelation-Based Route to Aluminum-Free Layered Transition Metal Carbides (MXenes)

Plasma-Liquid Synthesis as a New Method for the Production of MXenes

Microwave-assisted rapid MAX phase etching and delamination: A paradigm shift in MXene synthesis

One MAX phase, different MXenes: a guideline to understand the crucial role of etching conditions on Ti$_3$C$_2$T$_x$ surface chemistry

Synthesis of fluorine free MXene through lewis acidic etching for application as electrode of proton supercapacitors

Fluorine-Free Synthesis of High-Purity Ti3 C2 Tx (T=OH, O) via Alkali Treatment

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching