Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Meso-scale Drag Model Designed for Coarse-Grid Eulerian-Lagrangian Simulation of Gas-Solid Flows

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Coarse-grid simulations of full-loop gas-solid flows using a hybrid drag model: Investigations on turbulence models

Construction and Analysis of the Mesoscale Drag Force Model Based on Machine Learning Methods

Mesoscale drag modeling: a critical review

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

An approach for drag correction based on the local heterogeneity for gas–solid flows

Theoretical derivation and a priori validation of a new scalar variance-based sub-grid drag force model for simulation of gas-solid fluidized beds

THE KEY SCIENTIFIC PROBLEMS IN THE EULERIAN MODELING OF LARGE-SCALE MULTI-PHASE FLOWS——DRAG MODEL

Verification of a Microscale Drag Model Considering the Effect of Gas–Structure Interface Via Fine-Grid Two-Fluid Simulations

Influence of meso-scale structures on drag in gas–solid fluidized beds

Large eddy simulation of scalar turbulence using a new subgrid eddy diffusivity model

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Models of Interphase Drag Force from Direct Numerical Simulations of Upward Turbulent Particle-Laden Channel Flows

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Theoretical analyses of the sub-grid quantities' effect on filtered Eulerian drag force

A generalized drag Law for heterogeneous gas-solid flows in fluidized beds

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

Homogeneous drag models in gas–solid fluidization: Big data analytics and conventional correlation

Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed