Abstract:This paper investigates the effects of height-asymmetric street canyon configurations on air temperature and air quality at the pedestrian level using the ANSYS Fluent (R) software. The study concerns the situation with a subtropical city where there is a predominant wind direction (as is the case in, e.g., Hong Kong) and where the direction of that wind is perpendicular to the street canyon, since this is the worst-case from air pollution and overheating point of view. In particular, this North-South oriented street has been studied with the realistic solar irradiance at two different sun directions, corresponding to morning (08:00) and afternoon (16:00) hours, respectively. Two step-up and two step-down North-South oriented street canyons are considered under two different incoming wind speeds (high and low). The corresponding ratios of upwind and downwind building heights are = 1/3, 2/3 and 3/1, 3/2, respectively. The results demonstrated that for the step-up canyon, a higher upwind building was found to produce a hotter air temperature only at a low wind speed and polluted more severely at both high and low wind speeds, compared with its lower upwind building counterpart. In contrast, for the step-down canyon, a higher downwind building was found to produce cooler air temperatures at both high and low wind speeds and accumulated more pollutants only at a low wind speed, compared with its lower downwind building counterpart. On the other hand, at the high wind speed, both air quality and thermal environment were better in the step-up canyon than in the step-down canyon. However, at the low wind speed, the air quality was higher in the step-down canyon than the step-up canyon, while the step-up canyon still provided better thermal environment than the step-down canyon. Moreover, a Richardson number (Ri) for the asymmetric street canyons is defined for the evaluation of the buoyancy force versus the inertial force. When vertical bar Ri vertical bar > 20, the flow field was mainly dominated by natural convection, and an increase of vertical bar Ri vertical bar resulted in an increase in the air temperature and a decrease in the pollutant concentration. In contrast, when vertical bar Ri vertical bar < 20, the flow field was dominated by forced convection, and the variation of vertical bar Ri vertical bar had an insignificant influence on air quality and air temperature. The simulated pollutant concentration and thermal environment results were further processed to obtain optimization guidelines for a north-south asymmetric canyon in the city centers of Hong Kong via the application of multivariate regression analysis with a group of dimensionless parameters. These guidelines will facilitate the renewal of north-south asymmetric street canyons while enhancing air quality and lowering air temperature by serving as a reference for architects.

Effects of Frontal Area Density on Outdoor Thermal Comfort and Air Quality

Exploring the Influence of Building Form Parameters on Three-Dimensional Ventilation Potential in Urban Centers: A Case Study of Nanjing, China

Simulation Study about Impact of Building Density on Heat Island Effect

Relationship between pedestrian-level outdoor thermal comfort and building morphology in a high-density city

Effects of Height-Asymmetric Street Canyon Configurations on Outdoor Air Temperature and Air Quality

Impacts of Urban Form on Thermal Environment Near the Surface Region at Pedestrian Height: A Case Study Based on High-Density Built-Up Areas of Nanjing City in China

Numerical Investigations of Urban Pollutant Dispersion and Building Intake Fraction with Various 3D Building Configurations and Tree Plantings

Impact of 3-D Urban Landscape Patterns on the Outdoor Thermal Environment: A Modelling Study with SOLWEIG.

Numerical Study of the Influences of Different Patterns of the Building and Green Space on Micro-Scale Outdoor Thermal Comfort and Indoor Natural Ventilation

Numerical Studies of the Outdoor Wind Environment and Thermal Comfort at Pedestrian Level in Housing Blocks with Different Building Layout Patterns and Trees Arrangement

Horizontal Heat Impacts of a Bare Facade on Air Temperature in an Adjacent Green Plot Within Pedestrian Heights in Beijing

Effects of building setback on thermal comfort and air quality in the street canyon

Quantitative Effects of Urban Spatial Characteristics on Outdoor Thermal Comfort Based on the LCZ Scheme

A Parametric-Simulation Method to Study the Interconnections between Urban-Street-Morphology Indicators and Their Effects on Pedestrian Thermal Comfort in Tropical Summer

Numerical simulation of the influence of building-tree arrangements on wind velocity and PM2.5 dispersion in urban communities

Numerical Analysis of the Effects of Different Window-Opening Strategies on the Indoor Pollutant Dispersion in Street-Facing Buildings

Assessment of overhead environments on pedestrian thermal comfort in a dense urban district

Effect of direct solar projected area factor on outdoor thermal comfort evaluation: A case study in Shanghai, China

Impacts of uneven surface heating of an ideal street canyon on airflows and indoor ventilation: Numerical study using OpenFOAM coupled with EnergyPlus

Building porosity for better urban ventilation in high-density cities - A computational parametric study

An experimental study of the effects of using cool materials at different building heights on the indoor and outdoor environment