Abstract:All-carbon flexible supercapacitors are highly promising in powering up wearable electronics in smart textiles. However, their low energy density hinders their practical application due to the lack of an effective fabrication method of highly conductive fiber electrodes with high specific capacitance. Herein, we develop a sustainable, scalable, and cost-effective method to fabricate lignin-based carbon/graphene fiber (GF) hybrid electrodes with a hierarchically porous structure. This engineered structure is achieved by coaxially wet spinning a graphene oxide fiber (GOF) as a core structural support and 0–10% lignin/graphene oxide (GO) as a surface layer, followed by carbonization and KOH activation processes. The obtained fiber electrodes exhibit the highest specific capacitance of 260.48 mF cm–2 at a current density of 0.1 mA cm–2, which is 11 times that of the neat GF from conventional wet spinning. The entire-device energy density of the assembled fiber-based flexible supercapacitors from the optimal fiber electrode is 5.79 μW h cm–2 in a H2SO4/poly(vinyl alcohol) electrolyte. Furthermore, the fiber-based flexible supercapacitors show ultralong cycling life and cycling stability (the capacitance retention rate is 98% after 7000 cycles of charge/discharge at a current density of 0.1 mA cm–2). This work enables the high-value utilization of low-cost carbon precursors (lignin and GO) in potential applications such as energy storage devices for smart textiles.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01379.Polarized optical microscopy image of GO solution at 15 mg mL–1; SEM images of the neat GF and unactivated 5% ; FTIR images of the GOF and GF; CV and GCD curves of the GF, unactivated 5% recorded at 5 mV s–1 and 0.1 mA cm–2; CV and GCD curves of flexible supercapacitors tested in a 2-electrode cell in 1 M H2SO4/PVA electrolyte of 0–10% ; electrical conductivity of ; calculated CA, CV, Esingle,A, and Psingle,A values of fiber electrodes based on GCD curves at a current density of 0.1 mA cm–2; calculated CA of fiber electrodes at different scan rates based on CV measurements; and calculated CA of fiber electrodes at current densities based on GCD measurements (PDF)This article has not yet been cited by other publications.

Alternately Dipping Method to Prepare Graphene Fiber Electrodes for Ultra-high-Capacitance Fiber Supercapacitors

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Monocrystalline FeMnO3 on Carbon Cloth for Extremely High-Areal-Capacitance Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Electrochemically Exfoliated Graphene Oxide Enhanced Hybrid Fibers with High Rate Performance for Fibrous Supercapacitors

Wet-spun Poly(ionic Liquid)-Graphene Hybrid Fibers for High Performance All-Solid-state Flexible Supercapacitors

Non-woven fabric electrodes based on graphene-based fibers for areal-energy-dense flexible solid-state supercapacitors

One-step wet-spinning assembly of twisting-structured graphene/carbon nanotube fiber supercapacitor

Fabrication of PEDOT:PSS/rGO fibers with high flexibility and electrochemical performance for supercapacitors

Electrochemical Performance of Coaxially Wet-Spun Hierarchically Porous Lignin-Based Carbon/Graphene Fiber Electrodes for Flexible Supercapacitors

One‐step hydrothermal method produced all graphene fiber electrode for high‐performance supercapacitor

3D Architecting triple gradient graphene-based fiber electrode for high-performance asymmetric supercapacitors

Preparation of quinone modified graphene-based fiber electrodes and its application in flexible asymmetrical supercapacitor

Flexible High Performance Wet-Spun Graphene Fiber Supercapacitors

Graphene-based Fibers for Supercapacitor Applications

High-performance MnO2@MXene/carbon nanotube fiber electrodes with internal and external construction for supercapacitors

Simple Mixed-Acid-Treated Carbon Fiber Electrodes with Oxygen-Containing Functional Groups for Flexible Supercapacitors

Polyaniline/graphene hybrid fibers as electrodes for flexible supercapacitors

Highly Electroconductive Mesoporous Graphene Nanofibers And Their Capacitance Performance At 4 V