Abstract:All-carbon flexible supercapacitors are highly promising in powering up wearable electronics in smart textiles. However, their low energy density hinders their practical application due to the lack of an effective fabrication method of highly conductive fiber electrodes with high specific capacitance. Herein, we develop a sustainable, scalable, and cost-effective method to fabricate lignin-based carbon/graphene fiber (GF) hybrid electrodes with a hierarchically porous structure. This engineered structure is achieved by coaxially wet spinning a graphene oxide fiber (GOF) as a core structural support and 0–10% lignin/graphene oxide (GO) as a surface layer, followed by carbonization and KOH activation processes. The obtained fiber electrodes exhibit the highest specific capacitance of 260.48 mF cm–2 at a current density of 0.1 mA cm–2, which is 11 times that of the neat GF from conventional wet spinning. The entire-device energy density of the assembled fiber-based flexible supercapacitors from the optimal fiber electrode is 5.79 μW h cm–2 in a H2SO4/poly(vinyl alcohol) electrolyte. Furthermore, the fiber-based flexible supercapacitors show ultralong cycling life and cycling stability (the capacitance retention rate is 98% after 7000 cycles of charge/discharge at a current density of 0.1 mA cm–2). This work enables the high-value utilization of low-cost carbon precursors (lignin and GO) in potential applications such as energy storage devices for smart textiles.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01379.Polarized optical microscopy image of GO solution at 15 mg mL–1; SEM images of the neat GF and unactivated 5% ; FTIR images of the GOF and GF; CV and GCD curves of the GF, unactivated 5% recorded at 5 mV s–1 and 0.1 mA cm–2; CV and GCD curves of flexible supercapacitors tested in a 2-electrode cell in 1 M H2SO4/PVA electrolyte of 0–10% ; electrical conductivity of ; calculated CA, CV, Esingle,A, and Psingle,A values of fiber electrodes based on GCD curves at a current density of 0.1 mA cm–2; calculated CA of fiber electrodes at different scan rates based on CV measurements; and calculated CA of fiber electrodes at current densities based on GCD measurements (PDF)This article has not yet been cited by other publications.

One‐step hydrothermal method produced all graphene fiber electrode for high‐performance supercapacitor

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Energy storage of supercapacitor electrodes on carbon cloth enhanced by graphene oxide aerogel reducing conditions

Chitosan-based oxygen-doped activated carbon/graphene composite for flexible supercapacitors

Electrochemical Performance of Coaxially Wet-Spun Hierarchically Porous Lignin-Based Carbon/Graphene Fiber Electrodes for Flexible Supercapacitors

Fabrication of PEDOT:PSS/rGO fibers with high flexibility and electrochemical performance for supercapacitors

Non-woven fabric electrodes based on graphene-based fibers for areal-energy-dense flexible solid-state supercapacitors

Free-standing Reduced Graphene Oxide/MoO3-x Composite Film with High Performance for Flexible Supercapacitors

CNT–rGO Hydrogel-Integrated Fabric Composite Synthesized via an Interfacial Gelation Process for Wearable Supercapacitor Electrodes

Facile Synthesis of Graphite-Reduced Graphite Oxide Core–Sheath Fiber via Direct Exfoliation of Carbon Fiber for Supercapacitor Application

Conductive copper-based metal-organic framework nanowire arrays grown on graphene fibers for flexible all-solid-state supercapacitors

Phase Inversion-Based Microfluidic-Fiber-Spinning Assembly of Self-Supported Rgo/pedot FiberFabrics Towards Wearable Supercapacitors

Methylene blue modified graphene film as high-performance electrode towards all-in-one flexible supercapacitors with “all-graphene” structure

Pulsed electrochemical fabrication of graphene/polypyrrole composite gel films for high performance and flexible supercapacitors

Composite of CoS1.97 nanoparticles decorated CuS hollow cubes with rGO as thin film electrode for high-performance all solid flexible supercapacitors

Improved-quality graphene films via the synergism of large nanosheet aligning and nanotube bridging for flexible supercapacitors

All-in-one Graphene Fiber Supercapacitor.

Depositing Reduced Graphene Oxide on Electroless Plating Ni/organic Polymer Fibrous Membrane for Flexible Supercapacitors

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Brush-electroplated Rgo@mno2 Composite Supported on Carbon Cloth for Flexible High-Performance Supercapacitor Electrodes

High electrochemical performance flexible solid-state supercapacitor based on Co-doped reduced graphene oxide and silk fibroin composites