Abstract:Large-scale collimating solar simulators (CSSs) with a light half divergence angle (HDA) of less than 1° have been developed. The small HDA ensures that the CSS can effectively simulate the optical behavior between natural sunlight and optical devices. However, the construction of large-scale CSSs still has a strict threshold because additional optical modules (AOMs), such as large-area collimating mirrors, are usually required to correct the light into collimated light. The manufacturing, installation, and adjustment of these precision optical devices pose significant challenges. An excellent scheme to avoid AOMs is to use the collimating radiation module (CRM), which can directly produce collimated light. Unfortunately, CRM can only produce light with an HDA of more than 3° at present, far larger than that of CSS with AOMs. Here, we report a CRM that can directly produce light with excellent collimation (an HDA<0.955°) and uniformity (>90 %). We accomplished this by analyzing the deviations between an idealized geometric optical model and actual CRMs and eliminating them with high-precision parts and a high-resolution adjustment method. We further used 24 CRMs to prove that the single-module collimating solar simulator (SMCSS, a radiation area of 2.55 m × 1.57 m) could be modularly constructed by them. Experimental investigations involving light-concentrating experiments on a parabolic trough collector demonstrated the superior collimation and simulation capabilities of the SMCSS. By eliminating the need for AOMs, the CRM and SMCSS significantly reduce system complexity and cost and lower the construction threshold for large-scale CSSs. It will benefit all experimental scenarios that need large-area collimated light and greatly promote the application of large-scale CSS in civilian solar research.

Stacking of Micro-Aperture Arrays: A New Strategy to Construct Söller Collimator for X Rays.

Investigation of Multichannel Spatial Demultiplexer Based on Thickness-Tapered Thin Film Stacks

A Method for Extending Depth of Focus in STED Nanolithography

Design of Four-fiber Collimator Based on a Variable-curvature Lens

Constructing the Large-Scale Collimating Solar Simulator with a Light Half-Divergence Angle <1° Using Only Collimating Radiation Modules

Stacking architecture for collimated backlight using cylindrical lens sheet with linear light sources or edge-lit/direct-lit BLU

Optimization of compact Soller collimator

All-in-One Collimating Splitter Based on a Meta-Fiber Platform

Quasi Monolithic Fiber Collimators

Microoptics: Multifurcate Assembly of Slanted Micropillars Fabricated by Superposition of Optical Vortices and Application in High-Efficiency Trapping Microparticles (Adv. Funct. Mater. 45/2017)

Optimization of a three slit collimation system for a SAXS camera with a divergent beam.

Beam Shaping for Two-Dimensional Laser Array by a Computational Model

Analytical computation of stray light in nested mirror modules for X-ray telescopes

Investigations on assembly and coverage for modular focal planes of multiplexed telescopes

Advanced manufacturing of 3D custom boron-carbide collimators designed for complex environments for neutron scattering

Single-Exposure Multiphoton Fabrication of Polygonized Structures by an Slm-Modulated Fresnel Zone Lens

Highly Uniform Parallel Microfabrication Using A Large Numerical Aperture System

Cold Cathode Coherent-Structure Flat Panel X-Ray Source Using Microarray Metal Target

Stiffener and staggered-square honeycomb structure design for lobster eye x ray micro pore optics

Beam-shaping of Laser Diode Stack for Uniform Illumination by Cylindrical Micro-Lenses

Wide-angle high-precision electronically controlled continuous beam scanning implementation based on MLAS cascaded AFOC