Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Rotor end factors for 2-D FEA of induction motors with smooth or slitted solid rotor

Calculation and Comparison of Rotor End Factors of Solid Rotor Induction Machines with Axial Slits

A Method for Calculating the Inductance of Switched Reluctance Motor Based on End Inductance Coefficient Function

Influence of End-Winding on Optimal Design Parameters for Maximum Torque of DC Excited Flux-Switching Machines

Research on the Calculation of the Skin Effect for Complex Rotor Bar-shape of the Asynchronous Motor

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Optimization Design of Linear Induction Motor and Study of the 3-Phase Asymmetry Phenomenon

Rotor Strength Analysis for High Speed Permanent Magnet Machines

Parameter Calculation and Performance Analysis of Solid Rotor Induction Machines Using 3D Subsectional and Multi-Layer Method

Analysis Of Rotor Equivalent Parameters Of Solid-Rotor Synchronous Motors

Rotor Strength Analysis of High-speed Permanent Magnet Synchronous Motors

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Analysis of a New Partitioned-primary Flux-reversal Hybrid-Excited Linear Motor

Influence of Mechanical Parameters on Power Efficiency of Induction Motors

Screw Rotors' 3-D Finite Element Analysis of Heat and Force Deflection

Magnetic Analysis and Design Method for Solid Rotor Induction Motors Based on Directly Coupled Field-Circuit

Large eddy simulation of end effects on a cylinder rotor

A Rotor Dynamics' Finite Element Model with Consideration of the Influential Effect of the Fluid

Study on Convection Heat Transfer of End-Winding for a 10 Kw External Rotor PMSM with Open End Cap

Design, Analysis, and Comparison of Electric Vehicle Drive Motor Rotors Using Injection-Molded Carbon-Fiber-Reinforced Plastics