Abstract:Sulfur hexafluoride (SF6) is widely used in electrical equipment because of its excellent insulating properties. The type of internal fault in the power system can be identified by detecting SF6 decomposition products. In this manuscript, we report a novel sensing material based on octahedral Co3O4-modified NiSnO3 nanofibers synthesized via a two-step process based on electrospinning followed by a hydrothermal method for detecting the SF6 decomposition products. From the evaluation of various characterization techniques, it was determined that the Co3O4 octahedra adhered inflexibly to the surface of the NiSnO3 nanofibers, which consist of smaller particles and provide a huge surface area for the adsorption of an enormous amount of gas species. Planar-type chemical gas sensors were devised, and their gas detecting performance against SF6 decomposition products was systematically investigated. A comparison of the sensitivity properties of different amounts of charged Co3O4 octahedra in NiSnO3 nanofibers shows that the S-2-based Co3O4@NiSnO3 composite has a high selectivity for 100 ppm SO2F2 gas with a high sensing response of 22.5 at a relatively low temperature of 50 °C with a moderate response/recovery interval (∼200/∼268 s) and a low detection limit (5 ppm) over other interfering gases, such as SOF2, SO2, and H2S. Interestingly, the sensing properties of the fabricated sensors based on the Co3O4@NiSnO3 composites for the SO2F2 gas were improved in terms of lower operating temperatures, higher gas responses, and mild response/recovery intervals, which could be attributed to the unique microstructure effect, the catalytic influence of Co3O4 octahedra, and the creation of p/n junctions to increase the charge transfer and diffusion rate within the catalytic assembly of the sensor materials. This work highlights the importance of the heterostructure design in the construction of high-performance gas sensors for the real-time detection of SF6 decomposition products.

Nanomaterials-based gas sensors of SF 6 decomposed species for evaluating the operation status of high-voltage insulation devices

Ni-CNT Chemical Sensor for SF6 Decomposition Components Detection: A Combined Experimental and Theoretical Study

WS2 Nanostructure-Based Gas Sensor for SF6 Decomposition Products: Experimental and First-Principles Study

Room-Temperature Detection of SF6 Decomposition Byproducts Using a G-C3n4@sno2-zno Composite Sensor

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co3O4-Modified NiSnO3 Nanofibers.

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co 3 O 4 -Modified NiSnO 3 Nanofibers

Exploration of SF 6 and its decomposed gases in adsorption and sensing (four modified WSe 2 monolayers at quantum level)

Chemiresistive detection of SO 2 in SF 6 decomposition products based on ZnO nanorod/MoS 2 nanoflower heterojunctions: experimental and first-principles investigations

Low-Temperature Monitoring of SF6 Decomposition Products Based on CeO2@MWCNTs Composite Sensor

Cr2-modified g-CN interface: A novel gas sensitive material for decomposition products of green insulating gas CF3SO2F

Carbon Monoxide Detection Based on the Carbon Nanotube-Coated Fiber Gas Sensor

Gas sensitivity evaluation of decomposition gases in environmentally friendly insulating devices (C 4 F 7 N/CO 2 ) (Chromium cluster-modified BNNTs surface interface at the atomic scale)

The gas-sensing mechanism of Nb2C monolayer for SF6 decomposition based on the DFT study

A Highly Sensitive and Selective SnS2 Monolayer Sensor in Detecting SF6 Decomposition Gas

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Theoretical Study on Adsorption Behavior of SF6 Decomposition Components on Mg-MOF-74

Pd-Adsorbed SiN 3 Monolayer as a Promising Gas Scavenger for SF 6 Partial Discharge Decomposition Components: Insights from the First-Principles Study

Decomposition characteristics of C4F7N-based SF6-alternative gas mixtures

Pt decorated Janus WSSe monolayer: A gas-sensitive material candidate for SF6 decomposition gases based on the first-principles

Density functional theory studies of Ti3C2TxMXene nanosheets decorated with Au for sensing SF6/N2nitrogen-containing decomposition gases

Gas-Sensing Performance of Metal Oxide Heterojunction Materials for SF6 Decomposition Gases: A DFT Study