Abstract:Sulfur hexafluoride (SF6) is widely used in electrical equipment because of its excellent insulating properties. The type of internal fault in the power system can be identified by detecting SF6 decomposition products. In this manuscript, we report a novel sensing material based on octahedral Co3O4-modified NiSnO3 nanofibers synthesized via a two-step process based on electrospinning followed by a hydrothermal method for detecting the SF6 decomposition products. From the evaluation of various characterization techniques, it was determined that the Co3O4 octahedra adhered inflexibly to the surface of the NiSnO3 nanofibers, which consist of smaller particles and provide a huge surface area for the adsorption of an enormous amount of gas species. Planar-type chemical gas sensors were devised, and their gas detecting performance against SF6 decomposition products was systematically investigated. A comparison of the sensitivity properties of different amounts of charged Co3O4 octahedra in NiSnO3 nanofibers shows that the S-2-based Co3O4@NiSnO3 composite has a high selectivity for 100 ppm SO2F2 gas with a high sensing response of 22.5 at a relatively low temperature of 50 °C with a moderate response/recovery interval (∼200/∼268 s) and a low detection limit (5 ppm) over other interfering gases, such as SOF2, SO2, and H2S. Interestingly, the sensing properties of the fabricated sensors based on the Co3O4@NiSnO3 composites for the SO2F2 gas were improved in terms of lower operating temperatures, higher gas responses, and mild response/recovery intervals, which could be attributed to the unique microstructure effect, the catalytic influence of Co3O4 octahedra, and the creation of p/n junctions to increase the charge transfer and diffusion rate within the catalytic assembly of the sensor materials. This work highlights the importance of the heterostructure design in the construction of high-performance gas sensors for the real-time detection of SF6 decomposition products.

Room-Temperature Detection of SF6 Decomposition Byproducts Using a G-C3n4@sno2-zno Composite Sensor

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co<sub>3</sub>O<sub>4</sub>-Modified NiSnO<sub>3</sub> Nanofibers

Room temperature monitoring of SF<sub>6</sub> decomposition byproduct SO<sub>2</sub>F<sub>2</sub> based on TiO<sub>2</sub>/NiSO<sub>4</sub> composite nanofibers

Room temperature monitoring of SF 6 decomposition byproduct SO 2 F 2 based on TiO 2 /NiSO 4 composite nanofibers

Room Temperature Monitoring of SF6decomposition Byproduct SO2F2based on TiO2/NiSO4composite Nanofibers.

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co 3 O 4 -Modified NiSnO 3 Nanofibers

Low-Temperature Monitoring of SF6 Decomposition Products Based on CeO2@MWCNTs Composite Sensor

Chemiresistive detection of SO 2 in SF 6 decomposition products based on ZnO nanorod/MoS 2 nanoflower heterojunctions: experimental and first-principles investigations

Heterostructure construction of SnS 2 Debye nanowires modified with ZnO nanorods for chemiresistive H 2 S detection in sulfur hexafluoride decomposition products

Ni-CNT Chemical Sensor for SF6 Decomposition Components Detection: A Combined Experimental and Theoretical Study

A Highly Sensitive and Selective SnS2 Monolayer Sensor in Detecting SF6 Decomposition Gas

CVD-fabricated Co3O4-Co3S4 heterojunction for ultra-sensitive detection of CO in SF6 discharge decomposition products

Highly Selective Detection of Sulfur Hexafluoride Decomposition Components H2S and SOF2 Employing Sensors Based on Tin Oxide Modified Reduced Graphene Oxide

Sulfur dioxide gas sensing at room temperature based on tin selenium/tin dioxide hybrid prepared via hydrothermal and surface oxidation treatment

Enhanced Sensing of Sulfur Hexafluoride Decomposition Components Based on Noble-Metal-functionalized Cerium Oxide

WS2 Nanostructure-Based Gas Sensor for SF6 Decomposition Products: Experimental and First-Principles Study

MOF-doped WO3 Nanofibers for the SF6 Decomposition Products: the Effects of MOF-modification on the Sensitive Performance and Mechanism

Carbon Monoxide Detection Based on the Carbon Nanotube-Coated Fiber Gas Sensor

Quantitative Detection of Sulphur Hexafluoride Decomposition Product with a Gas Sensor Array

The gas-sensing mechanism of Nb2C monolayer for SF6 decomposition based on the DFT study

Research on SF6 gas decomposition detection method based on electrochemical sensors